Tag Archives: ball bearing groove

China wholesaler All Series Bearings Needle Roller Thrust Cylindrical Pillow Block Ball Deep Groove Ball Auto Angular Contact Tapered Roller Spherical Rolling Bearing deep groove ball bearing

Product Description

   

Company Profile

       MKS Hydraulics ZheJiang Co., Ltd.is a scientific and professional bearing producing enterprise, gathering R&D, producing and sales as 1  integration.mainly operating on non-standard, special andgeneral bearings.

       The company is especially focusing on the research and manufacture of general high-tech production with the 20 years R&D experience, professional R&D staff and advanced equipment, of which 8 sets are imported equipment and 40 sets are high-precision processing equipment. it has invested for building a modern workshop, including 1 Bainite heat processing workshop of world advanced level, 1 machine processing workshop, 2 moder thermostatic &no-dust roller grinders, assembly workshop, physical-chemical testing center, heating laboratory and moder-managed warehouse. Depending on the markets in China and abroad, the company puts an active attitude upon products R&D, resulting a healthy circulation of 1 development generation, 1 reserve generation, and 1 producion generation. The enterprise enlarges the R&D investment, creates own brand, and strives to increase the exporting products of high-tech & high value-added, gains the honorable sales result and grows into 1 of the largest R&D enterprise in China of non-standard bearing and special bearing.

       The advanced technology, outstanding quaity and considerable service after sales with enthusiasm make us get the rapid development in quite short time of years, and now it becomes the largest developing and producing enterprise in Asia of concrete carrier truck, speed-reducing machine,mine-digging machine, hydraulic pump spindle bearing and crecent bearing. With the continuing and wholly new developing theory of Technology is the motivation and quality is the life, We are not only pursuing the leading position in China, but also determined to march into the worldwide bearing area during it developing process, The products are mainly applied on the industries of mine, metalurgy, engineering, machineny, machine tool,electronic machine and so on, The products have gained the excllent sales resul in the markets of Europe, Southeast Asia, Middle East and so on in a dozen of countries and areas.

Company Environment

Company Advantages

Packaging & Shipping

FAQ

1. how can we guarantee quality?
Always final Inspection before shipment;

2.what can you buy from us?
Auto Bearing,Bearing Housing,Taper Roller Bearing,Casting,Hydraulic pump,Hydraulic parts,excavator parts and so on.

Ceep groove ball bearing/Self aligning ball bearing/Cylindrical roller bearing/Spherical roller bearing/ Angular contact ball bearing/Tapered roller bearing/ Thrust ball bearing/Thrust cylindrical roller bearing/Needle roller bearing

3. why should you buy from us not from other suppliers?
One stop bearing and mechanical customized parts,
Designed bearing,
Small quantity order available 
Factory price offer
OEM ODM bearing service

4.What is the transportation?
lf small quantity,we suggest to send by express,such as DHL,UPS,TNT FEDEX flarge amount,by air or sea shipping.

5.Can we design packaging?
Except regular packing,and we can make customer’s own packing.

6.What’s your payment method?
We can accept LC, T/T, D/P, PayPal, Western Union, Small-amount payment, MoneyGram etc.

7.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.

8.Is the company a production factory or a trading company?
MKS company is a manufacturing enterprise focusing on bearings ,hydraulic pumps and hydraulic parts , produce and sales.

If you have any questions,Please contact us,We must be reply quickly.

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Raceway Super Finishing: Yes
Bearing Grade: P3
Service: OEM / ODM Customized Logo
Shipment: by Sea, by Air, by Express
Quality: Good /High Quality
Features: High Precision, High Speed, Long Life
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

How do pillow block bearings contribute to the proper functioning of food processing equipment?

Pillow block bearings play a crucial role in ensuring the proper functioning of food processing equipment. They provide reliable support and smooth operation for rotating shafts and components in various stages of food processing. Here are the key contributions of pillow block bearings to the proper functioning of food processing equipment:

  • Sanitary Design:
  • In food processing environments, maintaining strict hygiene standards is essential. Pillow block bearings designed for food processing equipment are constructed with materials and features that adhere to sanitary requirements. They are often made from stainless steel or other corrosion-resistant materials that are easy to clean and withstand frequent washdowns. Additionally, these bearings have smooth surfaces, rounded edges, and minimal crevices to prevent the accumulation of food particles, debris, or bacteria. The sanitary design of pillow block bearings ensures the integrity and cleanliness of the equipment, minimizing the risk of contamination and ensuring compliance with food safety regulations.

  • Reliable Performance:
  • Food processing equipment operates under demanding conditions, including high production rates, heavy loads, and frequent start-stop cycles. Pillow block bearings are designed to withstand these challenges and provide reliable performance. They offer excellent load-bearing capacity, shock resistance, and vibration damping capabilities. This ensures smooth and stable operation of rotating shafts, reducing the risk of equipment failure, downtime, and production interruptions. By contributing to the reliable performance of food processing equipment, pillow block bearings support efficient and uninterrupted food processing operations.

  • Corrosion Resistance:
  • Food processing environments often involve exposure to moisture, chemicals, and cleaning agents. Pillow block bearings designed for food processing equipment are highly resistant to corrosion and chemical attack. They are made from materials that can withstand the corrosive effects of food acids, cleaning solutions, and other substances encountered in the processing area. The corrosion resistance of these bearings helps maintain their structural integrity, extends their lifespan, and ensures reliable performance even in harsh operating conditions.

  • Contamination Prevention:
  • Preventing contamination is of utmost importance in food processing. Pillow block bearings incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of contaminants into the bearing housing. These seals provide a barrier against dirt, dust, moisture, and other external elements, minimizing the risk of contamination of the food products. The effective sealing of pillow block bearings helps maintain the cleanliness and purity of the processing environment, safeguarding the quality and safety of the food products.

  • Easy Maintenance:
  • Maintenance and cleanliness are critical in food processing equipment. Pillow block bearings are designed for easy maintenance, inspection, and cleaning. They often have features such as grease fittings or lubrication access points that facilitate the replenishment of lubricants without disassembling the bearing. This simplifies routine maintenance tasks and allows for timely lubrication, ensuring optimal bearing performance. The ease of maintenance of pillow block bearings contributes to the overall efficiency and reliability of food processing equipment.

  • Versatility:
  • Food processing equipment encompasses a wide range of applications, such as mixing, grinding, conveying, and packaging. Pillow block bearings offer versatility and can be used in various equipment types and configurations. They are available in different sizes, load capacities, and mounting options to accommodate the specific requirements of different food processing applications. The versatility of pillow block bearings allows for their integration into diverse equipment designs, supporting the proper functioning of food processing machinery.

In summary, pillow block bearings contribute to the proper functioning of food processing equipment by offering a sanitary design, ensuring reliable performance, providing corrosion resistance, preventing contamination, enabling easy maintenance, and offering versatility. By fulfilling these roles, pillow block bearings support the efficient, hygienic, and uninterrupted operation of food processing equipment while maintaining the highest standards of food safety and quality.

pillow block bearing

Are there specific maintenance practices that can extend the lifespan of pillow block bearings?

Yes, there are specific maintenance practices that can help extend the lifespan of pillow block bearings. By following these practices, you can optimize the performance, reliability, and longevity of the bearings. Here are some essential maintenance practices for pillow block bearings:

  • Regular Inspection:
  • Perform regular inspections of the pillow block bearings to check for any signs of wear, damage, or contamination. Inspect the bearing housing, seals, lubrication, and any visible components. Regular inspections help identify issues early on and allow for timely maintenance or replacement.

  • Lubrication:
  • Proper lubrication is crucial for the smooth operation of pillow block bearings. Follow the manufacturer’s recommendations for the type of lubricant and the appropriate lubrication intervals. Ensure that the bearing is adequately lubricated to reduce friction, prevent excessive wear, and protect against corrosion.

  • Cleanliness:
  • Maintain cleanliness in the surrounding area of pillow block bearings to prevent the entry of contaminants. Keep the bearing housing clean and free from dirt, dust, and debris that can cause damage or hinder smooth operation. Regularly clean the bearing housing and seals as part of your maintenance routine.

  • Alignment:
  • Ensure proper alignment of the pillow block bearings and the associated components. Misalignment can lead to increased stress, vibration, and premature wear. Align the bearings according to the manufacturer’s specifications and make adjustments as necessary to maintain proper alignment.

  • Temperature Monitoring:
  • Monitor the operating temperature of the pillow block bearings. Excessive heat can indicate potential issues such as inadequate lubrication or bearing damage. Continuously high temperatures can accelerate wear and reduce the lifespan of the bearings. Regularly check the temperature and address any abnormal readings promptly.

  • Training and Documentation:
  • Provide proper training to personnel responsible for the maintenance of pillow block bearings. Ensure they understand the correct procedures for inspection, lubrication, and other maintenance tasks. Maintain documentation of maintenance activities, including lubrication schedules, inspections, and any repairs or replacements, for reference and tracking purposes.

  • Replacement when Necessary:
  • Finally, it is important to replace pillow block bearings when they show signs of significant wear, damage, or have reached their expected lifespan. Continuing to operate with worn or damaged bearings can lead to failures, production disruptions, and potential safety hazards. Follow the manufacturer’s recommendations and consult with bearing specialists or technicians to determine the appropriate timing for replacement.

By implementing these maintenance practices, you can extend the lifespan of pillow block bearings, improve their performance, and minimize the risk of unexpected failures. Regular inspections, proper lubrication, cleanliness, alignment, temperature monitoring, training, documentation, and timely replacement are key factors in ensuring the longevity and efficient operation of pillow block bearings.

pillow block bearing

What are pillow block bearings and how are they used in various industrial applications?

Pillow block bearings, also known as plummer block bearings, are a type of bearing mounted inside a housing or block, typically made of cast iron or pressed steel. These bearings are widely used in various industrial applications due to their versatility and ease of installation. Here’s a detailed explanation of pillow block bearings and their uses:

  • Design and Construction:
  • A pillow block bearing consists of a bearing insert (such as a deep groove ball bearing, spherical roller bearing, or cylindrical roller bearing) and a housing or block. The housing is typically a split design that allows for easy installation and maintenance. It usually has a flat base with mounting holes for attachment to a support structure, such as a machine frame or conveyor system. The bearing insert is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts.

  • Supporting Shaft Loads:
  • Pillow block bearings are primarily used to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the pillow block bearing allows for self-aligning capability, which helps accommodate slight misalignments or shaft deflections, ensuring smooth operation and reducing stress on the bearing.

  • Easy Installation and Maintenance:
  • One of the key advantages of pillow block bearings is their ease of installation and maintenance. The split housing design allows for quick assembly and disassembly without the need to remove other components or disassemble the entire system. This feature simplifies bearing replacement, lubrication, and inspection, reducing downtime and maintenance costs in industrial applications.

  • Versatility and Adaptability:
  • Pillow block bearings are highly versatile and adaptable to various industrial applications. They can be found in a wide range of industries, including manufacturing, mining, agriculture, construction, and material handling. These bearings are used in conveyor systems, power transmission equipment, pumps, fans, compressors, and many other rotating machinery applications.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. Additionally, the housing design often includes provisions for grease or oil lubrication, further protecting the bearing and ensuring proper lubrication for optimal performance.

  • Specialized Variations:
  • While the basic design of pillow block bearings remains the same, there are specialized variations available to meet specific application requirements. These include corrosion-resistant bearings for harsh environments, high-temperature bearings for elevated temperature applications, and sealed bearings for applications where additional protection against contamination is needed.

In summary, pillow block bearings are bearing units housed in a block or housing, widely used in various industrial applications. They provide support for rotating shafts, transmit loads, accommodate misalignments, and offer easy installation and maintenance. Their versatility, adaptability, and environmental protection make them suitable for diverse industrial sectors. With specialized variations available, pillow block bearings can be customized to meet specific application needs, ensuring reliable and efficient operation in a wide range of industrial machinery and equipment.

China wholesaler All Series Bearings Needle Roller Thrust Cylindrical Pillow Block Ball Deep Groove Ball Auto Angular Contact Tapered Roller Spherical Rolling Bearing   deep groove ball bearingChina wholesaler All Series Bearings Needle Roller Thrust Cylindrical Pillow Block Ball Deep Groove Ball Auto Angular Contact Tapered Roller Spherical Rolling Bearing   deep groove ball bearing
editor by CX 2024-05-14

China Good quality Heavy Duty Flange Housing Pillow Block Bearing Ucf UCFL Ucfu Ucfc Ucfs 204 205 206 207 208 209 210 211 212 213 214 CZPT CZPT CZPT  Timken deep groove ball bearing

Product Description

Heavy Duty flange housing pillow block bearing UCF UCFL UCFU UCFC UCFS ASAHI CZPT TIMKEN

Pillow blocks, the most commonly used type of mounted units, are housings that have a bearing fitted into them. They are designed to provide shaft support where the mounting surface is parallel to the shaft axis. Normally, the bolts have slots for adjustment when mounted. Typically manufactured from cast iron or cast steel, the pillow block bearing housing has provisions to allow the housing to be bolted down snugly. Pillow blocks are supplied in a variety of configurations and are usually mounted in cleaner environments and generally are meant for lesser loads of general industry.
Pillow blocks are widely used in agriculture machines, conveyor systems, construction machines, etc.

Product Description

 

Bearing material Chrome steel(GCR15)
Housing material Cast iron(HT200)
Housing color Green, blue, gray, or according to customer requirement
Brand PSK, HOJE, or OEM
Structure Pillow Block Bearing
Design Standard Design & NTN,NSK,ASAHI Design
Seals Type Double Seals & Triple Lips Seals & F Seals & Four-star seal
Place of Origin ZheJiang , China
steel ball G10,G16
Coordination for Bearing & Housing H7 & J7& K7
Packing 1. plastic bag+single box+carton+pallet
2. According to Customer’s Requirements
Noise Z1, Z2, Z3, Z4
Sample Free Sample
quality ABEC-1(P0),  Z1V1, Z2V2

Detailed Photos

 

 

Our Advantages

Company Advantages

1. FREE SAMPLES: contact us by email or trade manager, and we will send the free samples according to your request.
2. World-Class Bearing: We provide our customers with all types of bearing with world-class quality.
3. OEM or Non-Stand Bearings: Any requirement for Non-standard bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry.
4. Genuine products With Excellent Quality: Company has always proved the 100% quality products it provides with genuine intent.
5. After Sales Service and Technical Assistance: Company provides after-sales service and technical assistance as per the customer’s requirements and needs.
6. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
7. Cost Saving: We provide long-life, shock-resistant, and high-reliability bearings with excellent quality and better performance. Resulting in increased cost savings.
8. Attending customer queries promptly: We believe that if customers is satisfied then it proves our worth well. Customers are always given quick support.

Products Advantages

Heavier and thicker bearing housing

The bearing uses a thickened bearing housing, which is more durable and has a long service life.

 

Double set screws

The bearing is equipped with double-set screws. the bearing and the shaft are used together to better fix the bearing inner ring and the shaft.

 

Four-star Seal

The bearing adopts 4-Star seals, which have a better sealing effect, it not easy to leak oil, has a strong dust-proof ability, and reduce maintenance costs.

Pillow Block Bearing Package 

 

Packaging & Shipping

Packaging
1)Commercial Bearings packaging: 1pc/plastic bag + color box + carton + pallet
2)Industrial Bearings packaging 
3)According to the requirement of customers
Payment
1) T/T:30% deposit, 70% should be paid before shipment.
2) L/C at sight. (high bank charge, not suggested, but acceptable )
3) 100% Western Union in advance. (especially for air shipment or small amounts)
Delivery
1) Less than 45 KGS, we will send by express. ( Door to Door, Convenient )
2) Between 45 – 200 KGS, we will send by air transport. ( Fastest and safest, but expensive )
3) More than 200 KGS, we will send by sea. ( Cheapest, but long time )

 

 

Company Profile

More Products

Bearings with Plummer block housing series as follows: UCP2, NAP2, UKP2+H, SBP2G, SAP2G, UCPX, UCP3, UCPH2, UCPA2, SAPP2, SBPP2
Bearings with square housing series are as follows: UCF2, UCF3.
Bearings with rhombus housing series as follows: UCFL2,UCFLX,UCFL3,SALF2G,SBLF2G,SALFTC2G,SBLFTC2G,SBPFL2,SAPFL2
Bearings with circle housing series as follows: UCFC2,SBPF2,SAPF2,SBPFT2,SAPFL2
Bearings with the slide set housing series as follows: UCT2
Other bearings with housing Units as UCC2, UCFB2, UCFA2, UCHA2

Pillow block Bearing Series :

UCPA200 series: UCPA201,UCPA202,UCPA203,UCPA204,UCPA205,UCPA206,UCPA207,UCPA208,UCPA209,UCPA210
UCP200 series: UCP201,UCP202,UCP203,UCP204,UCP205,UCP206,UCP207,UCP208,UCP209,UCP210,UCP211,UCP212,UCP213,UCP214,UCP215,UCP216,UCP217,UCP218
UCF200 series: UCF201,UCF202,UCF203,UCF204,UCF206,UCF207,UCF208,UCF209,UCF210,UCF211,UCF212,UCF213,UCF214,UCF215,UCF216,UCF217,UCF218 
UCT200 series: UCT201,UCT202,UCT203,UCT204,UCT205,UCT206,UCT207,UCT208,UCT209,UCT210,UCT211,UCT212,UCT213,UCT214,UCT215,UCT216,UCT217
UCFL200 series: UCFL201,UCFL202,UCFL203,UCFL204,UCFL205,UCFL206,UCFL207,UCFL208,UCFL209,UCFL210,UCFL211,UCFL212,UCFL213,UCFL214,UCFL215,UCFL216,UCFL217,UCFL218
UCFC200 series: UCFC201,UCFC202,UCFC203,UCFC204,UCFC205,UCFC206,UCFC207,UCFC208,UCFC209,UCFC210,UCFC211,UCFC212,UCFC213,UCFC214,UCFC215,UCFC216,UCFC217,UCFC218
SBPF200 series: SBPF201,SBPF201-8,SBPF202,SBPF202-9,SBPF202-1,SBPF203,SBPF203-11,SBPF204,SBPF204-12,SBPF205,SBPF205-13,SBPF205-14,SBPF205-15,SBPF205-16,SBPF206,SBPF206-17,SBPF206-18,SBPF206-19,SBPF206-20,SBPF207,SBPF207-20,SBPF207-21,SBPF207-22,SBPF207-23,SBPF208,SBPF208-24,SBPF208-25
SBPFL200 series: SBPFL201,SBPFL201-8,SBPFL202,SBPFL202-9,SBPFL202-10,SBPFL203,SBPFL203-11,SBPFL204,SBPFL204-12,SBPFL205,SBPFL205-13,SBPFL205-14,SBPFL205-15,SBPFL205-16,SBPFL206,SBPFL206-17,SBPFL206-18,SBPFL206-19,SBPFL206-20,SBPFL207,SBPFL207-20,SBPFL207-21,SBPFL207-22,SBPFL207-23,SBPFL208,SBPFL208-24,SBPFL208-25
SBPP200 series: SBPP201,SBPP201-8,SBPP202,SBPP202-9,SBPP202-10,SBPP203,SBPP203-11,SBPP204,SBPP204-12,SBPP205,SBPP205-13,SBPP205-14,SBPP205-15,SBPP205-16,SBPP206,SBPP206-17,SBPP206-18,SBPP206-19,SBPP206-20,SBPP207,SBPP207-21,SBPP207-22,SBPP207-23

Bearing Uint No. Shaft Dia d Dimensinons(mm) Bolt Used Bearing No. Housing No. Housing
Wt (kg)
h a e b S2 S1 g w t Z Bi n (mm) (in)
(in) (mm)
UCP201-8 1/2   30.2 127 95 38 19 13 14 62 2 51 31 12.7 M10 3/8 UC201-8 P203 0.33
UCP202-9 9/16   UC202-9
UCP202-10 5/8   UC202-10
UCP203-11 11/16   UC203-11
UCP201   12 UC201
UCP202   15 UC202
UCP203   17 UC203
UCP204-12 3/4   33.3 127 95 38 19 13 14 65 2 51 31 12.7 M10 3/8 UC204-12 P204 0.46
UCP204   20 UC204
UCP205-13 13/16 25 36.5 140 105 38 19 13 15 71 2 57 34.1 14.3 M10 3/8 UC205-13 P205 0.60
UCP205-14 7/8 UC205-14
UCP205-15 15/16 UC205-15
UCP205-16 1 UC205-16
UCP205   UC205
UCP206-17 1-1/16 30 42.9 165 121 48 21 17 17 83 2 62 38.1 15.9 M14 1/2 UC206-17 P206 0.97
UCP206-18 1-1/8 UC206-18
UCP206-19 1-3/16 UC206-19
UCP206-20 1-1/4 UC206-20
UCP206   UC206
UCP207-20 1-1/4 35 47.6 167 127 48 21 17 18 93 3 72 42.9 17.5 M14 1/2 UC207-20 P207 1.00
UCP207-21 1-5/16 UC207-21
UCP207-22 1-3/8 UC207-22
UCP207-23 1-7/16 UC207-23
UCP207   UC207
UCP208-24 1-1/2 40 49.2 184 137 54 21 17 18 98 3 82 49.2 19.0 M14 1/2 UC208-24 P208 1.30
UCP208-25 1-9/16 UC208-25
UCP208   UC208
UCP209-26 1-5/8 45 54 190 146 54 21 17 20 106 3 82 49.2 19.0 M14 1/2 UC209-26 P209 1.40
UCP209-27 1-11/16 UC209-27
UCP209-28 1-3/4 UC209-28
UCP209   UC209
UCP210-29 1-13/16 50 57.2 206 159 60 25 20 21 114 3 87 51.6 19.0 M16 5/8 UC210-29 P210 1.83
UCP210-30 1-7/8 UC210-30
UCP210-31 1-15/16 UC210-31
UCP210-32 2 UC210-32
UCP210   UC210
UCP211-32 2 55 63.5 219 171 60 25 20 23 126 4 92 55.6 22.2 M16 5/8 UC211-32 P211 2.4
UCP211-33 2-1/16 UC211-33
UCP211-34 2-1/8 UC211-34
UCP211-35 2-3/16 UC211-35
UCP211   UC211
UCP212-36 2-1/4 60 69.8 241 184 70 25 20 25 138 4 102 65.1 25.4 M16 5/8 UC212-36 P212 2.8
UCP212-37 2-5/16 UC212-37
UCP212-38 2-3/8 UC212-38
UCP212-39 2-7/16 UC212-39
UCP212   UC212
UCP213-40 2-1/2 65 76.2 265 203 70 29 25 27 151 4 107 65.1 25.4 M20 3/4 UC213-40 P213 3.5
UCP213-41 2-9/16 UC213-41
UCP213   UC213
UCP214-42 2-5/8 70 79.4 266 210 72 31 25 27 157     74.6 30.2 M20 3/4 UC214-42 P214 4.45
UCP214-43 2-11/16 UC214-43
UCP214-44 2-3/4 UC214-44
UCP214   UC214
UCP215-45 2-13/16 75 82.6 275 217 74 31 25 28 163     77.8 33.3 M20 3/4 UC215-45 P215 4.9
UCP215-46 2-7/8 UC215-46
UCP215-47 2-15/16 UC215-47
UCP215-48 3 UC215-48
UCP215   UC215
UCP216-50 3-1/8 80 88.9 292 232 78 31 25 30 175     82.6 33.3 M20 3/4 UC216-50 P216 5.8
UCP216   UC216
UCP217-52 3-1/4 85 95.2 310 247 83 31 25 32 187     85.7 34.1 M20 3/4 UC217-52 P217 6.9
UCP217   UC217
UCP218-56 3-1/2 90 101.6 327 262 88 33 27 33 200     96.0 39.7 M22 7/8 UC218-56 P218 8.10

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Non-Aligning Bearing
Separated: Unseparated
Feature: Corrosion Resistant, High Temperature, High Speed
Rows Number: Single
Raceway: Deep Groove Raceway
Material: Bearing Steel
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

What considerations are important when selecting the appropriate size and housing material for a pillow block bearing?

When selecting the appropriate size and housing material for a pillow block bearing, several considerations are important to ensure optimal performance and reliability. Here are the key factors to consider:

  • Load Capacity:
  • Determine the anticipated load that the pillow block bearing will be subjected to. Consider both the magnitude and direction of the load. This information is crucial for selecting a bearing with the appropriate load capacity. It ensures that the bearing can handle the applied loads without premature wear or failure.

  • Shaft Size and Fit:
  • Take into account the size and tolerance of the shaft that the bearing will be mounted on. The bearing and shaft should have compatible dimensions and proper fit. Consider factors such as shaft diameter, tolerance, and shape to ensure a secure and accurate fit between the bearing and the shaft.

  • Operating Speed:
  • Understand the expected operating speed of the application. Different pillow block bearings are designed to handle specific speed ranges. Ensure that the selected bearing’s speed rating is suitable for the anticipated operating conditions. Operating the bearing within its speed limitations prevents excessive heat generation and premature failure.

  • Environmental Conditions:
  • Evaluate the environmental factors that the pillow block bearing will be exposed to. Consider aspects such as temperature extremes, humidity, dust, chemicals, and potential contaminants. Choose a bearing and housing material that can withstand the specific environmental conditions to ensure long-term durability and optimal performance.

  • Corrosion Resistance:
  • If the application is exposed to corrosive elements, select a pillow block bearing with appropriate corrosion resistance. Stainless steel or other corrosion-resistant materials may be necessary to prevent degradation and maintain the functionality of the bearing in such environments.

  • Housing Material:
  • Consider the housing material for the pillow block bearing. Common housing materials include cast iron, stainless steel, thermoplastic, and composite materials. The choice of housing material depends on factors such as load requirements, environmental conditions, corrosion resistance, and cost considerations. Each housing material has its own advantages and limitations, so select the most suitable material for the specific application.

  • Lubrication:
  • Identify the lubrication requirements of the pillow block bearing. Some bearings may require periodic lubrication, while others are designed to be maintenance-free or self-lubricating. Consider the availability of lubrication access points and the ease of lubrication when selecting the bearing and housing. Proper lubrication ensures smooth operation, reduces friction, and extends the bearing’s lifespan.

By carefully considering these factors when selecting the appropriate size and housing material for a pillow block bearing, you can ensure compatibility, performance, and longevity in the specific application. Consulting with bearing manufacturers, engineers, or industry experts can provide valuable guidance in making the optimal selection for your specific requirements.

pillow block bearing

How do pillow block bearings enhance the performance of agricultural machinery like tractors?

Pillow block bearings play a vital role in enhancing the performance of agricultural machinery, including tractors. Their contributions to the functionality and efficiency of tractors can be outlined as follows:

  • Support and Load Handling:
  • Pillow block bearings provide essential support for the rotating shafts and other moving components in agricultural machinery, such as tractors. They handle and transmit the loads applied to the machinery, including the weight of the equipment, implements, and the forces encountered during operation. By effectively supporting the shafts and components, pillow block bearings help maintain the structural integrity of the machinery and ensure smooth and efficient movement, contributing to overall performance.

  • Reduced Friction and Wear:
  • Pillow block bearings are designed to minimize friction between the rotating shafts and the bearing housing, reducing energy losses and wear. By incorporating rolling elements, such as balls or rollers, pillow block bearings facilitate smooth motion with reduced friction. This friction reduction results in improved energy efficiency, reduced power consumption, and extended lifespan of the bearings and other related components in the agricultural machinery like tractors.

  • Alignment and Stability:
  • Proper alignment of the components is crucial for the efficient operation of agricultural machinery, including tractors. Pillow block bearings aid in aligning and supporting the shafts and other moving parts, ensuring they remain centered and in the correct position. This alignment helps prevent excessive vibrations, reduces the risk of misalignment-related issues, and promotes stable and consistent performance, enhancing the overall functionality of tractors.

  • Contamination Protection:
  • Agricultural environments can be harsh, with exposure to dust, dirt, moisture, and other contaminants. Pillow block bearings are designed to provide protection against these contaminants. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of foreign particles into the bearing. This protection helps maintain the cleanliness of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage, and contributing to the reliable and efficient operation of tractors.

  • Maintenance and Accessibility:
  • Maintenance is an essential aspect of ensuring the performance and longevity of agricultural machinery like tractors. Pillow block bearings are designed with ease of maintenance in mind. They often feature a split housing design that allows for convenient access to the bearing without the need to disassemble the entire machinery. This accessibility simplifies maintenance tasks, reduces downtime, and promotes efficient upkeep of the bearings, contributing to the overall performance and reliability of tractors.

In summary, pillow block bearings enhance the performance of agricultural machinery like tractors by providing support, handling loads, reducing friction and wear, ensuring alignment and stability, protecting against contaminants, and offering ease of maintenance. With their crucial role in supporting and facilitating the movement of shafts and components, pillow block bearings optimize the performance, energy efficiency, and lifespan of agricultural machinery, contributing to improved productivity and reliability in farming operations.

pillow block bearing

What are the common applications and industries where pillow block bearings are commonly used?

Pillow block bearings are widely used in various applications and industries where there is a need to support rotating shafts or other moving parts. These bearings offer versatility, ease of installation, and reliable performance. Here’s a detailed explanation of the common applications and industries where pillow block bearings are commonly used:

  • Industrial Machinery:
  • Pillow block bearings find extensive use in industrial machinery across different sectors. They are commonly employed in conveyor systems, packaging machinery, material handling equipment, printing presses, textile machinery, and food processing equipment. These bearings provide support and smooth rotation for shafts, pulleys, rollers, and other components, contributing to the efficient operation of the machinery.

  • Agricultural Equipment:
  • In the agricultural industry, pillow block bearings are utilized in various equipment such as tractors, combines, harvesters, and irrigation systems. They are used to support rotating elements like shafts, wheels, pulleys, and augers. Pillow block bearings help withstand heavy loads, provide reliable operation, and ensure the longevity of agricultural machinery under challenging field conditions.

  • Mining and Quarrying:
  • Pillow block bearings are employed in mining and quarrying operations where heavy-duty equipment is used. They are utilized in crushers, screens, conveyors, and vibrating equipment. These bearings can handle high loads and harsh operating conditions, making them suitable for the demanding environments encountered in mining and quarrying applications.

  • Construction and Building:
  • Pillow block bearings play a vital role in the construction and building industry. They are commonly used in concrete mixers, cranes, hoists, elevators, and escalators. These bearings provide support and enable smooth movement for various components and systems involved in construction and building processes.

  • Automotive and Transportation:
  • Pillow block bearings are utilized in automotive and transportation applications. They are used in commercial vehicles, buses, trucks, and trailers. These bearings support rotating shafts, wheels, and suspension systems, ensuring smooth operation and reducing friction and wear in automotive and transportation equipment.

  • Power Generation:
  • The power generation industry relies on pillow block bearings for applications such as turbines, generators, pumps, and fans. These bearings provide support and rotational motion for various components in power generation systems. They are designed to handle high temperatures, heavy loads, and high-speed operations commonly encountered in power plants.

  • HVAC and Refrigeration:
  • Pillow block bearings are commonly used in heating, ventilation, air conditioning (HVAC), and refrigeration systems. They are employed in fans, blowers, compressors, and pumps. These bearings ensure smooth and efficient operation of HVAC and refrigeration equipment, contributing to the comfort and functionality of residential, commercial, and industrial buildings.

These are just a few examples of the many applications and industries where pillow block bearings are commonly used. The versatility and reliability of these bearings make them indispensable in numerous fields, where they provide essential support and rotational motion for various machinery and equipment.

China Good quality Heavy Duty Flange Housing Pillow Block Bearing Ucf UCFL Ucfu Ucfc Ucfs 204 205 206 207 208 209 210 211 212 213 214 CZPT CZPT CZPT  Timken   deep groove ball bearingChina Good quality Heavy Duty Flange Housing Pillow Block Bearing Ucf UCFL Ucfu Ucfc Ucfs 204 205 206 207 208 209 210 211 212 213 214 CZPT CZPT CZPT  Timken   deep groove ball bearing
editor by CX 2024-04-23

China manufacturer Deep Groove Ball Bearing Thrust Ball Bearing Pillow Block Bearing Insert Bearing Thrust Roller Bearing Wheel Bearing Taper Roller Bearing bearing driver

Product Description

Product Description

Spherical roller bearings are double row, self-retaining units comprising solid outer ring with a concave raceway, solid inner rings and barrel rollers with cages. The inner rings with cylingdrical or tapered bores. The symmetrical barrel rollers freely align themselves to the concave outer ring raceway. As a result, shaft deflectiongs and mislignments of the bearing seats are compensated.

Model: 20000 CC/CCK/CC W33/CCK W33/CCK MB/CA/CAK
+H0000/CCK W33+H0000 series
Material: Gcr15, chrome Steel,
Precision: P0–P5
Clearance: C0-C3
Cage: Brass/Steel

———————————————————

We,
Guarantee the Quality standard ASSURED. In contract.

Guarantee the Delivery time as ASSURED (MAX. 40D)

Guarantee the Material as ASSURED

Guarantee the Package As ASSURED

Our Advantages
1, Experience: 20 years experience on bearing manufacturing and exporting.
2, Customer: Exporting to more than 126 countries on 6 continents
3, Quality standard: ONLY Above than P6
4, Delivery Within: 10-40 days after T/T or L/C, pay penalty for any delay.

FAQ
1.What is the minimum order quantity for this product?
    Can be negotiated, we will try our best to meet customer needs.Our company is mainly based
    on wholesale sales,most customers’orders are more than 1 ton.
2.What is your latest delivery time?
    Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
    Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
    High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
    Answer questions online 24 hours a day, reply in a timely manner, and provide various documents
    required by customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
    Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
    Please send us an inquiry or message and leave your other contact information, such as phone number,
     account or account, we will contact you as soon as possible and provide
    the detailed information you need.
       Please feel free to contact us, if you have any other question
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: ISO9001:2015
Contact Angle: 25°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Multiple
Load Direction: Radial Bearing
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

Can you provide insights into recent advancements in pillow block bearing technology?

Recent years have witnessed significant advancements in pillow block bearing technology, driven by the need for improved performance, reliability, and efficiency. These advancements have introduced innovative features and materials, as well as enhanced design and manufacturing techniques. Here are some key insights into the recent advancements in pillow block bearing technology:

  • Advanced Materials:
  • New materials have been developed to enhance the performance of pillow block bearings. For example, the use of advanced polymers and composite materials in bearing components offers benefits such as improved corrosion resistance, reduced friction, and lower weight. These materials can withstand demanding operating conditions and provide extended service life. Additionally, the development of specialized coatings and surface treatments has further enhanced the tribological properties of bearing surfaces, reducing wear and friction.

  • Sealing and Contamination Control:
  • Advancements in sealing technology have focused on improving the effectiveness of seals in preventing contamination and extending bearing life. Innovative seal designs, such as multiple lip seals and non-contact seals, provide superior protection against the ingress of dirt, moisture, and other contaminants. These advanced sealing solutions help maintain the cleanliness of the bearing interior and enhance reliability in challenging environments.

  • Lubrication Solutions:
  • Lubrication is crucial for optimal bearing performance, and recent advancements have focused on improving lubrication solutions. Automatic lubrication systems have become more sophisticated, offering precise and controlled lubricant delivery to pillow block bearings. These systems can be equipped with sensors and monitoring capabilities to ensure proper lubrication and detect abnormalities in lubricant condition or distribution. In addition, the development of advanced lubricants, such as synthetic greases and food-grade lubricants, has improved the efficiency and longevity of pillow block bearings.

  • Enhanced Bearing Design:
  • Advancements in bearing design have focused on optimizing load distribution, reducing friction, and improving overall performance. Finite element analysis (FEA) and computer-aided design (CAD) tools have enabled more accurate modeling and simulation of bearing behavior, leading to improved designs. Features such as optimized internal geometries, increased contact angles, and improved raceway profiles have resulted in higher load capacities, reduced noise, and improved running accuracy.

  • Condition Monitoring and Predictive Maintenance:
  • Recent advancements have introduced advanced monitoring and diagnostic techniques for pillow block bearings. Vibration analysis, thermal imaging, and acoustic emission monitoring are used to detect early signs of bearing wear, misalignment, or lubrication issues. These technologies enable predictive maintenance strategies, allowing for timely intervention and minimizing the risk of unexpected equipment failure. Condition monitoring systems integrated with pillow block bearings provide valuable insights into bearing health and enable proactive maintenance planning.

  • Smart and IoT Integration:
  • The integration of smart technologies and the Internet of Things (IoT) has also impacted pillow block bearing technology. Bearings equipped with sensors and connectivity capabilities can provide real-time data on various parameters, including temperature, vibration, and load conditions. This data can be collected, analyzed, and used for performance optimization, predictive maintenance, and remote monitoring. Smart bearings enable the implementation of Industry 4.0 concepts, enhancing overall equipment efficiency and enabling proactive decision-making.

In summary, recent advancements in pillow block bearing technology have introduced advanced materials, improved sealing and contamination control, enhanced lubrication solutions, optimized bearing designs, enabled condition monitoring and predictive maintenance, and integrated smart and IoT capabilities. These advancements contribute to improved performance, extended service life, and enhanced reliability of pillow block bearings, supporting various industrial applications.

pillow block bearing

How do pillow block bearings contribute to the efficient operation of conveyor systems?

Pillow block bearings play a crucial role in ensuring the efficient operation of conveyor systems. Their contributions can be outlined as follows:

  • Support and Load Handling:
  • Pillow block bearings provide support for the rotating shafts in conveyor systems. They are responsible for handling and transmitting the loads applied to the conveyor, including the weight of the conveyed material and any external forces. By effectively supporting the shaft, pillow block bearings help maintain the structural integrity of the conveyor and ensure smooth and efficient movement of the material.

  • Reduced Friction and Wear:
  • Pillow block bearings are designed to minimize friction between the rotating shaft and the bearing housing. They incorporate rolling elements, such as balls or rollers, which facilitate smooth motion with reduced friction. By reducing friction and wear, pillow block bearings help optimize the energy efficiency of the conveyor system, minimizing power consumption and extending the lifespan of the bearings and other related components.

  • Alignment and Stability:
  • Proper alignment of the conveyor components is essential for efficient operation. Pillow block bearings aid in aligning and supporting the shaft, ensuring that it remains centered and in the correct position. This alignment helps prevent excessive vibrations, reduces the risk of misalignment-related issues, and promotes stable and consistent performance of the conveyor system.

  • Protection and Contamination Prevention:
  • Pillow block bearings are designed to provide protection against contaminants, moisture, and debris in the operating environment. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of foreign particles into the bearing. This protection helps maintain the cleanliness of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage. By preventing contamination, pillow block bearings contribute to the efficient and reliable operation of the conveyor system.

  • Maintenance and Accessibility:
  • Conveyor systems require periodic maintenance, including bearing inspection, lubrication, and potential replacement. Pillow block bearings are designed with ease of maintenance in mind. They often feature a split housing design that allows for convenient access to the bearing without disassembling the entire conveyor system. This accessibility simplifies maintenance tasks, reduces downtime, and promotes efficient upkeep of the bearings, ensuring the long-term reliability and performance of the conveyor system.

In summary, pillow block bearings contribute to the efficient operation of conveyor systems by providing support, handling loads, reducing friction and wear, ensuring alignment and stability, protecting against contaminants, and offering ease of maintenance. With their essential role in supporting and facilitating the movement of conveyor shafts, pillow block bearings help optimize the performance, energy efficiency, and longevity of conveyor systems.

pillow block bearing

Can you explain the design principles of pillow block bearings and their functions?

Pillow block bearings, also known as plummer block bearings, are designed based on certain principles to ensure their functionality and performance. Understanding the design principles can provide insights into how these bearings operate and fulfill their intended functions. Here’s a detailed explanation of the design principles of pillow block bearings and their functions:

  • Housing Design:
  • The housing of a pillow block bearing is typically made of cast iron or pressed steel and has a split design. The split housing allows for easy installation and maintenance by providing access to the bearing insert without the need to disassemble the entire system. The housing also includes mounting holes or slots for attaching the bearing to a support structure, such as a machine frame or conveyor system.

  • Bearing Insert:
  • The bearing insert is a key component of a pillow block bearing. It is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts. The design of the bearing insert depends on the specific application requirements. Common types of bearing inserts used in pillow block bearings include deep groove ball bearings, spherical roller bearings, and cylindrical roller bearings. The selection of the appropriate bearing insert depends on factors such as load capacity, speed, and environmental conditions.

  • Self-Aligning Capability:
  • Pillow block bearings are designed with a certain degree of self-aligning capability. This means that they can accommodate slight misalignments or shaft deflections without causing undue stress on the bearing or affecting its performance. The self-aligning capability is achieved through the design of the bearing insert and the housing. It helps to ensure smooth operation, reduce wear, and prolong the bearing’s service life.

  • Load Support:
  • Pillow block bearings are primarily designed to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the bearing insert and the housing is optimized to provide optimal load-carrying capacity and distribute the loads evenly, minimizing stress concentrations and maximizing the bearing’s performance.

  • Lubrication:
  • Lubrication is crucial for the proper functioning and longevity of pillow block bearings. The housing design often includes provisions for grease or oil lubrication. Lubrication helps to reduce friction, dissipate heat, prevent wear, and protect against corrosion. Proper lubrication ensures smooth operation, minimizes power losses, and extends the service life of the bearing.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. The housing design may include features such as seals or shields to further enhance the protection against contaminants. This design principle helps to maintain the integrity of the lubrication and ensure reliable operation in various working environments.

In summary, pillow block bearings are designed based on certain principles to ensure their functionality and performance. The housing design allows for easy installation and maintenance, while the bearing insert provides the rotating element to support shafts and transmit loads. The self-aligning capability accommodates misalignments, and the optimized design of the bearing insert and housing ensures proper load support. Lubrication and environmental protection features contribute to smooth operation and extended service life. Understanding these design principles helps in selecting and utilizing pillow block bearings effectively in various industrial applications.

China manufacturer Deep Groove Ball Bearing Thrust Ball Bearing Pillow Block Bearing Insert Bearing Thrust Roller Bearing Wheel Bearing Taper Roller Bearing   bearing driverChina manufacturer Deep Groove Ball Bearing Thrust Ball Bearing Pillow Block Bearing Insert Bearing Thrust Roller Bearing Wheel Bearing Taper Roller Bearing   bearing driver
editor by CX 2024-04-23

China Custom Long Operating Life Pillow Block Bearing UCP212 deep groove ball bearing

Product Description

1.Product Parameters:

2.Product Picture:

3.Application Area:
1. Automatic controlling machine
2. Semi-conductor industry
3. General industry machinery
4. Medical equipment
5. Solar energy equipment
6. Machine tool
7. Parking system
8. High-speed rail and aviation transportation equipment, etc.

        

4.Production Process:

5.Why choose us?

Rigorous Business Philosophy
▄ HangZhou Kent bearing Co., Ltd established in 2, 63192752 Fax: Address: Mayan Industry Zone, Henghe Town, HangZhou, HangZhou, China

 8.FAQ

1.Q:Are you a factory or trading company?
   A:Kent Bearing is specialized in manufacturing and exporting bearings,
      and we have our own  factory and warehouse.
2.Q:Can I get some samples and do you offer the sample free?
   A:Yes, sure, Kent Bearing are honored to offer you samples.
3.Q: How about the shipping?
   A: We can arrange the shipment or you may have the forwarder.
4.Q: Could you tell me the material of our bearing?
   A: We have chrome steel, and stainless steel, ceramic and plastic material.

5.Q: Can we get support if we have our own market position?

   A:  Please inform us detailed information about your market,we will dicuss
        and propose helpful suggestion for you and to find the best solution for you.
 OEM POLICY
 1.We can printing your brand (logo,artwork)on the shield or laser engraving your brand
    on the shield.
 2.We can custom your packaging according to your design.
 3.All copyright own by clients and we promised don’t disclose any info.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Non-Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Thrust Bearing
Material: Bearing Steel
Raceway: Deep Groove Raceway
Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

What role do pillow block bearings play in applications with varying temperature and environmental conditions?

Pillow block bearings play a crucial role in applications with varying temperature and environmental conditions by providing reliable and durable support for rotating shafts and components. Their specific contributions in such applications can be explained as follows:

  • Temperature Stability:
  • Pillow block bearings are designed to withstand a wide range of operating temperatures. They are often constructed with materials that can handle both high and low temperature extremes. Specialized heat-resistant materials, such as high-temperature alloys or heat-treated steels, are used to ensure the bearing’s stability and integrity even in applications with elevated temperatures. By maintaining their structural integrity under varying temperature conditions, pillow block bearings help ensure the continued functionality and performance of the machinery.

  • Expansion and Contraction Compensation:
  • Varying temperature conditions can cause thermal expansion and contraction of the components in machinery. Pillow block bearings are engineered to accommodate these dimensional changes. By allowing for slight movement and adjustment due to thermal expansion, they help prevent excessive stress on the shafts and other components. This compensation for thermal expansion and contraction contributes to the overall stability and longevity of the machinery, even in environments with significant temperature fluctuations.

  • Environmental Protection:
  • In applications with varying environmental conditions, pillow block bearings provide protection against contaminants, moisture, and other external elements. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of dirt, dust, water, and other contaminants into the bearing. This protection helps maintain the cleanliness and integrity of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage caused by environmental factors. By safeguarding the bearing, pillow block bearings ensure reliable and efficient operation in environments with varying conditions.

  • Corrosion Resistance:
  • In corrosive environments where moisture, chemicals, or other corrosive agents are present, pillow block bearings with corrosion-resistant materials, such as stainless steel or special coatings, offer additional protection. These bearings are designed to withstand the corrosive effects of the environment, preventing degradation and maintaining their functionality over an extended period. By providing corrosion resistance, pillow block bearings enhance the reliability and lifespan of machinery operating in environments with varying temperature and corrosive conditions.

  • Shock and Vibration Absorption:
  • Applications with varying temperature and environmental conditions often involve machinery subjected to shocks and vibrations. Pillow block bearings are engineered to absorb and dampen these shocks and vibrations, reducing their impact on the rotating shafts and other components. This absorption capability helps prevent excessive stress, minimizes the risk of component failure, and ensures the smooth and reliable operation of the machinery, even in environments with dynamic conditions.

  • Maintenance and Longevity:
  • Pillow block bearings designed for applications with varying temperature and environmental conditions often incorporate features that simplify maintenance and extend bearing life. They may have lubrication systems or self-lubricating properties that ensure proper lubrication even in challenging environments. Additionally, they may be designed for easy inspection, cleaning, and replacement, allowing for timely maintenance and minimizing downtime. These features contribute to the longevity and reliability of the machinery in applications with varying temperature and environmental conditions.

In summary, pillow block bearings play a critical role in applications with varying temperature and environmental conditions by providing temperature stability, compensating for expansion and contraction, protecting against contaminants and corrosion, absorbing shocks and vibrations, and facilitating maintenance and longevity. Their ability to withstand and adapt to changing conditions ensures the reliable operation and extended lifespan of machinery in diverse environments.

pillow block bearing

Are there specific maintenance practices that can extend the lifespan of pillow block bearings?

Yes, there are specific maintenance practices that can help extend the lifespan of pillow block bearings. By following these practices, you can optimize the performance, reliability, and longevity of the bearings. Here are some essential maintenance practices for pillow block bearings:

  • Regular Inspection:
  • Perform regular inspections of the pillow block bearings to check for any signs of wear, damage, or contamination. Inspect the bearing housing, seals, lubrication, and any visible components. Regular inspections help identify issues early on and allow for timely maintenance or replacement.

  • Lubrication:
  • Proper lubrication is crucial for the smooth operation of pillow block bearings. Follow the manufacturer’s recommendations for the type of lubricant and the appropriate lubrication intervals. Ensure that the bearing is adequately lubricated to reduce friction, prevent excessive wear, and protect against corrosion.

  • Cleanliness:
  • Maintain cleanliness in the surrounding area of pillow block bearings to prevent the entry of contaminants. Keep the bearing housing clean and free from dirt, dust, and debris that can cause damage or hinder smooth operation. Regularly clean the bearing housing and seals as part of your maintenance routine.

  • Alignment:
  • Ensure proper alignment of the pillow block bearings and the associated components. Misalignment can lead to increased stress, vibration, and premature wear. Align the bearings according to the manufacturer’s specifications and make adjustments as necessary to maintain proper alignment.

  • Temperature Monitoring:
  • Monitor the operating temperature of the pillow block bearings. Excessive heat can indicate potential issues such as inadequate lubrication or bearing damage. Continuously high temperatures can accelerate wear and reduce the lifespan of the bearings. Regularly check the temperature and address any abnormal readings promptly.

  • Training and Documentation:
  • Provide proper training to personnel responsible for the maintenance of pillow block bearings. Ensure they understand the correct procedures for inspection, lubrication, and other maintenance tasks. Maintain documentation of maintenance activities, including lubrication schedules, inspections, and any repairs or replacements, for reference and tracking purposes.

  • Replacement when Necessary:
  • Finally, it is important to replace pillow block bearings when they show signs of significant wear, damage, or have reached their expected lifespan. Continuing to operate with worn or damaged bearings can lead to failures, production disruptions, and potential safety hazards. Follow the manufacturer’s recommendations and consult with bearing specialists or technicians to determine the appropriate timing for replacement.

By implementing these maintenance practices, you can extend the lifespan of pillow block bearings, improve their performance, and minimize the risk of unexpected failures. Regular inspections, proper lubrication, cleanliness, alignment, temperature monitoring, training, documentation, and timely replacement are key factors in ensuring the longevity and efficient operation of pillow block bearings.

pillow block bearing

Can you explain the design principles of pillow block bearings and their functions?

Pillow block bearings, also known as plummer block bearings, are designed based on certain principles to ensure their functionality and performance. Understanding the design principles can provide insights into how these bearings operate and fulfill their intended functions. Here’s a detailed explanation of the design principles of pillow block bearings and their functions:

  • Housing Design:
  • The housing of a pillow block bearing is typically made of cast iron or pressed steel and has a split design. The split housing allows for easy installation and maintenance by providing access to the bearing insert without the need to disassemble the entire system. The housing also includes mounting holes or slots for attaching the bearing to a support structure, such as a machine frame or conveyor system.

  • Bearing Insert:
  • The bearing insert is a key component of a pillow block bearing. It is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts. The design of the bearing insert depends on the specific application requirements. Common types of bearing inserts used in pillow block bearings include deep groove ball bearings, spherical roller bearings, and cylindrical roller bearings. The selection of the appropriate bearing insert depends on factors such as load capacity, speed, and environmental conditions.

  • Self-Aligning Capability:
  • Pillow block bearings are designed with a certain degree of self-aligning capability. This means that they can accommodate slight misalignments or shaft deflections without causing undue stress on the bearing or affecting its performance. The self-aligning capability is achieved through the design of the bearing insert and the housing. It helps to ensure smooth operation, reduce wear, and prolong the bearing’s service life.

  • Load Support:
  • Pillow block bearings are primarily designed to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the bearing insert and the housing is optimized to provide optimal load-carrying capacity and distribute the loads evenly, minimizing stress concentrations and maximizing the bearing’s performance.

  • Lubrication:
  • Lubrication is crucial for the proper functioning and longevity of pillow block bearings. The housing design often includes provisions for grease or oil lubrication. Lubrication helps to reduce friction, dissipate heat, prevent wear, and protect against corrosion. Proper lubrication ensures smooth operation, minimizes power losses, and extends the service life of the bearing.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. The housing design may include features such as seals or shields to further enhance the protection against contaminants. This design principle helps to maintain the integrity of the lubrication and ensure reliable operation in various working environments.

In summary, pillow block bearings are designed based on certain principles to ensure their functionality and performance. The housing design allows for easy installation and maintenance, while the bearing insert provides the rotating element to support shafts and transmit loads. The self-aligning capability accommodates misalignments, and the optimized design of the bearing insert and housing ensures proper load support. Lubrication and environmental protection features contribute to smooth operation and extended service life. Understanding these design principles helps in selecting and utilizing pillow block bearings effectively in various industrial applications.

China Custom Long Operating Life Pillow Block Bearing UCP212   deep groove ball bearingChina Custom Long Operating Life Pillow Block Bearing UCP212   deep groove ball bearing
editor by CX 2024-04-11

China Best Sales All Series Bearings of Spherical / Needle Roller/Thrust/ Cylindrical/ Pillow Block/Deep Groove Ball Angular Contact Ball Bearing 7220AC 7221AC 7222AC 7224AC bearing driver

Product Description

 

Product Description

The characteristic of angular contact bearing is that it can bear both radial load and single axial load. The larger the contact Angle, the larger the axial load, the smaller the contact Angle, the smaller the axial load. Conversely, the smaller the contact Angle, the greater the ability to bear radial loads, and the more suitable for high-speed applications. According to different working conditions, it can be combined in a variety of ways to obtain different radial and axial load capacity, and meet the requirements of high speed and diameter, and high axial stiffness.

Angular contact ball bearing accuracy class includes dimensional tolerance and rotation accuracy. From low to high accuracy is expressed as P0(ordinary), P6(P6X), P5, P4, P2, in addition, P3, P7, P9 are also used in European and American brands to indicate accuracy levels, P3 is equivalent to level P6 of ISO and JS standards, P7 is equivalent to level P4, and P9 is equivalent to level P2.

Product Parameters

Product Specification

Single Row Angular Contact Ball Bearing

Bearing type Boundary Dimensions(mm) Load Rating
(kn)
Speed Rating(ipm) Weight
New Model Old Model    d D B Dymamic Cr Static Cor Grease
lubrication
Oil
lubrication
Weight
(kg)
7000AC 46100 10 26 8 5 2.35 34000 42000 0.571
7001AC 46101 12 28 8 5.4 2.75 29000 37000 0.571
7002AC 46102 15 32 9 6.1 3.45 26000 32000 0.035
7003AC 46103 17 35 10 6.75 4.15 23000 28000 0.045
7004AC 46104 20 42 12 10.3 6.1 19000 24000 0.079
7005AC 46105 25 47 12 11.3 7.4 17000 21000 0.091
7006AC 46106 30 55 13 14.5 10.1 14000 18000 0.133
7007AC 46107 35 62 14 17.5 12.6 12000 15000 0.17
7008AC 46108 40 68 15 18.7 14.6 11000 14000 0.21
7009AC 46109 45 75 16 22.2 17.7 10000 12000 0.26
7571AC 46110 50 80 16 23.6 20.1 9200 11000 0.29
7011AC 46111 55 90 18 31.1 26.3 8300 10000 0.42
7012AC 46112 60 95 18 31.9 28.1 7700 9700 0.45
7013AC 46113 65 100 18 33.7 31.4 7200 9000 0.47
7014AC 46114 70 110 20 42.7 39.4   8300 0.66
7015AC 46115 75 115 20 43.6 41.7 6300 7800 0.69
7016AC 46116 80 125 22 53.4 50.6 5800 7200 0.93
7017AC 46117 85 130 22 54.6 53.7 5500 6800 0.97
7018AC 46118 90 140 24 65.2 63.3 5100 6400 1.26
7019AC 46119 95 145 24 66.6 67.1 4800 6000 1.32
7571AC 46120 100 150 24 68.4 70.6 4700 5900 1.37
7571AC 46121 105 160 26 79.8 81.9 4400 5500 1.73
7571AC 46122 110 170 28 91.9 92.8 4200 5200 2.14
7571AC 46124 120 180 28 96.6 103 3900 4900 2.27
7026AC 46126 130 200 33 117 125 3500 4400 3.43
7571AC 46128 140 210 33 120 133 3300 4100 3.64
7030AC 46130 150 225 35 137 154 3000 3800 4.43
7032AC 46132 160 240 38         5.02
7034AC 46134 170 260 42 186 214 2600 3200 7.56
7038AC 46138 190 290 46 217 268 2300 2800 10.8
7040AC 46140 200 310 51 244 309 2100 2600 12.7

 

Bearing type Boundary Dimensions(mm) Load Rating
(kn)
Speed Rating(ipm) Weight
New Model Old Model    d D B Dymamic Cr Static Cor Grease
lubrication
Oil
lubrication
Weight
(kg)
7200AC 46200 10 30 9 4.65 2.2 29000 37000 0.031
7201AC 46201 12 32 10 7.45 3.65 27000 34000 0.038
7202AC 46202 15 35 11 8.1 4.25 24000 29000 0.048
7203AC 46203 17 40 12 10.2 5.5 21000 26000 0.07
7204AC 46204 20 47 14 14.5 8.4 17000 22000 0.112
7205AC 46205 25 52 15 15.3 9.5 15000 19000 0.135
7206AC 46206 30 62 16 21.3 13.7 13000 16000 0.208
7207AC 46207 35 72 17 28.1 18.6 11000 14000 0.295
7208AC 46208 40 80 18 33.6 23.3 10000 12000 0.382
7209AC 46209 45 85 19 37.7 26.6 9400 12000 0.43
7210AC 46210 50 90 20 39.4 41.3 8500 11000 0.485
7211AC 46211 55 700 21 48.7 37.1 7600 9500 0.635
7212AC 46212 60 110 22 58.9 45.7 6900 8600 0.82
7213AC 46213 65 120 23 67.3 54.2 6400 8000 1.02
7214AC 46214 70 125 24 69.8 55.6 6100 7600 1.12
7215AC 46215 75 130 25 79.2 65.2 5800 7200 1.23
7216AC 46216 80 140 26 85.3 71.5 5400 6700 1.5
7217AC 46217 85 150 28 98.6 83.6 5000 6300 1.87
7218AC 46218 90 760 30 113 96.7 4700 5900 2.3
7219AC 46219 95 770 32 122 103 4400 5500 2.78
7220AC 46220 100 180 34 137 117 4100 5200 3.32
7221AC 46221 105 190 36 149 132 3900 4900 3.95
7222AC 46222 110 200 38 162 148 3700 4600 4.65
7224AC 46224 130 215 40 174 166 3400 4300 5.49
7226AC 46226 130 230 40 196 198 3200 4000 6.21
7228AC 46228 140 250 42 218 234 2900 3600 7.76
7232AC 46232 160 290 48 230 263 2500 3100 12.1
7234AC 46234 170 370 52 272 331 2300 2800 15.1
7236AC 46236 180 320 52 293 362 2200 2700 15.7
7240AC 46240 200 360 58 324 432 1900 2400 22.4
7244AC 46244 220 400 65 358 482 1100 1600 38.5

 

Bearing type Boundary Dimensions(mm) Load Rating Speed Rating(ipm) Weight
(kn)
New Model Old Model    d D B Dymamic Cr Static Cor Grease Oil Weight
lubrication lubrication (kg)
7300AC 46300 10 35 11 8.5 3.75 27000 33000 0.054
7301AC 46301 12 37 12 10.2 4.6 24000 31000 0.065
7302AC 46302 15 42 13 12.5 6.45 20000 25000 0.088
7303AC 46303 17 47 14 14.9 7.9 18000 23000 0.12
7304AC 46304 20 52 15 17.4 9.4 17000 21000 0.15
7305AC 46305 25 62 17 24.8 14.4 14000 17000 0.243
7306AC 46306 30 72 19 30.1 18.9 12000 14000 0.362
7307AC 46307 35 80 21 35.4 22 10000 13000 0.475
7308AC 46308 40 90 23 43.2 27.4 9200 12000 0.657
7309AC 46309 45 100 25 55.1 37.1 8200 10000 0.875
7310AC 46310 50 170 27 70.1 48.7 7300 9100 1.14
7311AC 46311 55 120 29 80.9 56.5 6700 8400 1.45
7312AC 46312 60 130 31 92.5 65.6 6200 7700 1.81
7313AC 46313 65 140 33 105 75.3 5800 7200 2.22
7314AC 46314 70 150 35 118 85.8 5400 6700 2.7
7315AC 46315 75 160 37 128 97 5000 6300 3.15
7316AC 46316 80 170 39 139 109 4700 5900 3.85
7317AC 46317 85 180 41 150 122 4400 5500 4.53
7318AC 46318 90 190 43 161 135 4200 5200 5
7319AC 46319 95 200 45 172 149 4000 4900 6.12
7320AC 46320 100 215 47 184 161 3600 4600 7.53
7321AC 46321 105 225 49 208 193 3500 4400 8.62
7322AC 46322 110 240 50 232 226 3200 4000 10.7
7324AC 46324 120 260 55 246 252 3000 3700 12.6
7326AC 46326 130 280 58 301 329 2700 3400 15.4
7328AC 46328 140 300 62 329 374 2500 3200 18.8
7330AC 46330 150 320 65 348 414 2300 2900 22.4
7332AC 46332 160 340 68 365 455 2200 2700 26.4
7334AC 46334 170 360 72 389 485 2000 2500 31.2
7336AC 46336 180 380 75 409 534 1900 2400 40
7338AC 46338 190 400 78 450 598 1800 2200 45.5
7340AC 46340 200 420 80 474 658 1700 2100 52
 
7406AC 46406 30 90 23   0.960
7407AC 46407 35 100 25   1.140
7408AC 46408 40 110 27   1.400
7409AC 46409 45 120 29   1.800
7410AC 46410 50 130 31   2.250
7411AC 46411 55 140 33   2.750
7412AC 46412 60 150 35   3.400
7413AC 46413 65 160 37   4.200
7414AC 46414 70 180 42   5.800
7415AC 46415 75 190 45   7.000
7416AC 46416 80 200 48   8.000

 

Bearing type Boundary Dimensions(mm) Load Rating
(kn)
Speed Rating(ipm) Weight
New Model Old Model    d D B Dymamic Cr Static Cor Grease
lubrication
Oil
lubrication
Weight
(kg)
7204BTN 66204 20 47 14 14.5 8.4 17000 22000 0.112
7205BTN 66205 25 52 15 15.3 9.5 15000 19000 0.135
7206BTN 66206 30 62 16 21.3 13.7 13000 16000 0.208
7207BTN 66207 35 72 17 28.1 18.9 11000 14000 0.295
7208BTN 66208 40 80 18 33.6 23.3 10000 12000 0.382
7209BTN 66209 45 85 19 37.7 27 9400 12000 0.43
7210BTN 66210 50 90 20 39.4 41.3 8500 11000 0.485
7211BTN 66211 55 100 21 48.7 37.1 7600 9500 0.635
7212BTN 66212 60 110 22 58.9 45.7 6900 8600 0.82
7213BTN 66213 65 120 23 67.3 54.2 6400 8000 1.02
7214BTN 66214 70 125 24 69.8 55.6 6100 7600 1.12
7215BTN 66215 75 130 25 79.2 65.2 5800 7200 1.23
7216BTN 66216 80 140 36 85.3 71.5 5400 6700 1.5
7217BTN 66217 85 150 28 98.6 83.6 5000 6300 1.87
7218BTN 66218 90 160 30 113 96.7 4700 5900 2.3
7219BTN 66219 95 170 32 122 103 4400 5500 2.78
7220BTN 66220 100 180 34 137 117 4700 5200 3.32
7221BTN 66221 105 190 36 149 132 3900 4900 3.95
7222BTN 66222 110 200 38 162 148 3700 4600 4.65
7224BTN 66224 120 215 40 174 166 3400 4300 5.49
7226BTN 66226 130 230 40 196 198 3200 4000 6.21
7228BTN 66228 140 250 42 218 234 2900 3600 7.76

 

Bearing type Boundary Dimensions(mm) Load Rating Speed Rating(ipm) Weight
(kn)
New Model Old Model    d D B Dymamic Cr Static Cor Grease Oil Weight
lubrication lubrication (kg)
7303BTN 66303 17 47 14 14.9 7.9 18000 23000 0.12
7304BTN 66304 20 52 15 17.4 9.4 17000 21000 0.15
7305BTN 66305 25 62 17 24.8 14.4 14000 77000 0.243
7306BTN 66306 30 72 19 30.1 19 12000 14000 0.362
7307BTN 66307 35 80 21 35.4 22 10000 13000 0.475
7308BTN 66308 40 90 23 43.2 27.4 9200 12000 0.657
7309BTN 66309 45 100 25 55.1 37.1 8200 10000 0.875
7310BTN 66310 50 110 27 70.1 48.1 7300 9100 1.14
7311BTN 66311 55 120 29 80.9 56.5 6700 8400 1.45
7312BTN 66312 60 130 31 92.5 65.6 6200 7700 1.81
7313BTN 66313 65 140 33 105 75.3 5800 7200 2.22
7314BTN 66314 70 150 35 118 85.8 5400 6700 2.7
7315BTN 66315 75 160 37 128 97 5000 6300 3.15
7316BTN 66316 80 170 39 139 109 4700 5900 3.85
7317BTN 66317 85 180 41 150 122 4400 5500 4.53
7318BTN 66318 90 190 43 161 135 4200 5200 5.3
7319BTN 66319 95 200 45 172 149 4000 4900 6.12
7320BTN 66320 100 215 47 184 161 3600 4600 7.53
7321BTN 66321 105 225 49 208 193 3500 4400 8.62
7322BTN 66322 110 240 50 232 226 3200 4000 10.1
7324BTN 66324 120 260 55 246 252 3000 3700 12.6

 

Company Profile

HangZhou solarich machinery Co., Ltd. is a professional manufacturer of bearings, specialized in the research and development of high precision angular contact ball bearings, double row angular contact ball bearings, ball screw bearings.
Our company in accordance with ISO international standards and GB national standards organization production, adhere to the “integrity, dedication, innovation, beyond” spirit of enterprise, “one heart, consistent, first-class” business philosophy, determined to choose reasonable quality axis for customers.
Products are widely used in: machine tool, precision machinery spindle, aviation, gas turbine, high frequency motor, high speed motor, air compressor, oil pump, printing machinery and other fields. The company promises to reasonable commodity prices, fast logistics delivery, quality service, and strong technical force, won the support and trust of customers, and truly realize the CZPT situation between the company and customers. Quality and development, is our pursuit.

Solutions

Single row angular contact ball bearings: machine tool spindle, high frequency motor, gas turbine, centrifugal separator, small car front wheel, differential pinion shaft, booster pump, drilling platform, food machinery, dividing head, repair welding machine, low noise type cooling tower, electromechanical equipment, painting equipment, machine slot plate, arc welding machine

Double row angular contact ball bearings: oil pump, Roots blower, air compressor, various transmission, fuel injection pump, printing machinery, planetary reducer, extraction equipment, cycloidal reducer, food packaging machinery, electric welding machine, electric soldering iron, square box, gravity spray gun, wire stripping machine, half shaft, inspection and analysis equipment, fine chemical machinery.

Our Advantages

1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
 

Packaging & Shipping

 

FAQ

 

Q: Are you trading company or manufacturer?
A: We are bearing manufacturer.

Q: How do you control quality of bearing?
A: All products and services passed ISO9001-2008 Quality Certificate.

Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail  for more information.

Q: How about the package?
A: Industrial packing in general condition (Plastic tube+ carton+ pallet). Accept design package when OEM.

Q: How long is the delivery time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days., depends on the model and quantity.

Q: How about the shipping?
A: We can arrange the shipment or you may have the forwarder.

Q: Is sample avaiable?
A: Yes, sample order is acceptable.

Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable. We can design the bearing with your requirements and use your own LOGO and package design.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: 25°
Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pillow block bearing

How do pillow block bearings contribute to the proper functioning of food processing equipment?

Pillow block bearings play a crucial role in ensuring the proper functioning of food processing equipment. They provide reliable support and smooth operation for rotating shafts and components in various stages of food processing. Here are the key contributions of pillow block bearings to the proper functioning of food processing equipment:

  • Sanitary Design:
  • In food processing environments, maintaining strict hygiene standards is essential. Pillow block bearings designed for food processing equipment are constructed with materials and features that adhere to sanitary requirements. They are often made from stainless steel or other corrosion-resistant materials that are easy to clean and withstand frequent washdowns. Additionally, these bearings have smooth surfaces, rounded edges, and minimal crevices to prevent the accumulation of food particles, debris, or bacteria. The sanitary design of pillow block bearings ensures the integrity and cleanliness of the equipment, minimizing the risk of contamination and ensuring compliance with food safety regulations.

  • Reliable Performance:
  • Food processing equipment operates under demanding conditions, including high production rates, heavy loads, and frequent start-stop cycles. Pillow block bearings are designed to withstand these challenges and provide reliable performance. They offer excellent load-bearing capacity, shock resistance, and vibration damping capabilities. This ensures smooth and stable operation of rotating shafts, reducing the risk of equipment failure, downtime, and production interruptions. By contributing to the reliable performance of food processing equipment, pillow block bearings support efficient and uninterrupted food processing operations.

  • Corrosion Resistance:
  • Food processing environments often involve exposure to moisture, chemicals, and cleaning agents. Pillow block bearings designed for food processing equipment are highly resistant to corrosion and chemical attack. They are made from materials that can withstand the corrosive effects of food acids, cleaning solutions, and other substances encountered in the processing area. The corrosion resistance of these bearings helps maintain their structural integrity, extends their lifespan, and ensures reliable performance even in harsh operating conditions.

  • Contamination Prevention:
  • Preventing contamination is of utmost importance in food processing. Pillow block bearings incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of contaminants into the bearing housing. These seals provide a barrier against dirt, dust, moisture, and other external elements, minimizing the risk of contamination of the food products. The effective sealing of pillow block bearings helps maintain the cleanliness and purity of the processing environment, safeguarding the quality and safety of the food products.

  • Easy Maintenance:
  • Maintenance and cleanliness are critical in food processing equipment. Pillow block bearings are designed for easy maintenance, inspection, and cleaning. They often have features such as grease fittings or lubrication access points that facilitate the replenishment of lubricants without disassembling the bearing. This simplifies routine maintenance tasks and allows for timely lubrication, ensuring optimal bearing performance. The ease of maintenance of pillow block bearings contributes to the overall efficiency and reliability of food processing equipment.

  • Versatility:
  • Food processing equipment encompasses a wide range of applications, such as mixing, grinding, conveying, and packaging. Pillow block bearings offer versatility and can be used in various equipment types and configurations. They are available in different sizes, load capacities, and mounting options to accommodate the specific requirements of different food processing applications. The versatility of pillow block bearings allows for their integration into diverse equipment designs, supporting the proper functioning of food processing machinery.

In summary, pillow block bearings contribute to the proper functioning of food processing equipment by offering a sanitary design, ensuring reliable performance, providing corrosion resistance, preventing contamination, enabling easy maintenance, and offering versatility. By fulfilling these roles, pillow block bearings support the efficient, hygienic, and uninterrupted operation of food processing equipment while maintaining the highest standards of food safety and quality.

pillow block bearing

What are the challenges and solutions for managing misalignment and vibration in pillow block bearings?

Misalignment and vibration pose challenges in the proper functioning and longevity of pillow block bearings. However, there are solutions available to address these issues. Let’s explore the challenges and corresponding solutions for managing misalignment and vibration:

  • Misalignment Challenges:
  • Misalignment occurs when the shaft and the bearing are not perfectly aligned. This can result from various factors, including improper installation, thermal expansion, shaft deflection, or external forces. The challenges associated with misalignment include:

    • Increased Friction and Wear: Misalignment causes uneven loading and increased friction between the bearing and the shaft. This can lead to accelerated wear, premature bearing failure, and reduced equipment performance.
    • Excessive Heat Generation: Misalignment generates additional heat due to increased friction. This heat can negatively impact the lubrication, leading to lubricant breakdown and reduced bearing life.
    • Vibration and Noise: Misaligned pillow block bearings can contribute to vibration and noise in the equipment. Excessive vibration can cause further damage to the bearing and other components, affecting the overall system’s stability and performance.
  • Misalignment Solutions:
  • To manage misalignment in pillow block bearings, several solutions can be implemented:

    • Proper Installation and Alignment: Ensuring correct installation procedures and alignment techniques during initial setup or bearing replacement is crucial. This includes aligning the shaft and the bearing within specified tolerances using alignment tools and techniques such as laser alignment or dial indicators.
    • Flexible Couplings: Flexible couplings can compensate for minor misalignments between the driving and driven components. These couplings allow for angular, parallel, and axial misalignment, reducing the transmitted misalignment to the pillow block bearings.
    • Self-Aligning Bearings: Some pillow block bearings are designed with self-aligning capabilities. These bearings can accommodate small amounts of misalignment without significant adverse effects. Self-aligning bearings utilize specialized internal geometries or spherical outer rings to maintain proper alignment under certain misalignment conditions.
    • Adjustable Bearing Housings: Certain pillow block bearing designs incorporate adjustable housings that allow for fine-tuning the alignment. These housings provide additional flexibility in aligning the bearing to the shaft, compensating for misalignment during operation.
  • Vibration Challenges:
  • Vibration refers to the oscillation or shaking of the bearing and the surrounding equipment. Excessive vibration can contribute to various issues:

    • Increased Friction and Wear: Vibrations can lead to higher levels of friction and wear within the bearing, potentially causing premature failure and reduced operational lifespan.
    • Structural Fatigue: Prolonged exposure to excessive vibration can lead to structural fatigue in the bearing housing, shaft, and other connected components. This can result in cracks, deformations, or even catastrophic failures.
    • Unstable Operation: Excessive vibration can negatively impact the stability and performance of the equipment. It can affect accuracy, precision, and overall system functionality.
  • Vibration Solutions:
  • Managing vibration in pillow block bearings involves implementing the following solutions:

    • Balancing: Balancing rotating components, such as shafts, pulleys, or rotors, reduces vibration caused by uneven weight distribution. Dynamic balancing techniques, including static and dynamic analysis, can identify and correct imbalances, minimizing vibration levels.
    • Vibration Analysis and Monitoring: Regular vibration analysis and monitoring can help detect and diagnose vibration issues in pillow block bearings. This involves using vibration sensors and analyzing the data to identify potential problems early on, allowing for timely corrective actions.
    • Vibration Damping: Employing vibration damping techniques, such as the use of vibration-absorbing materials or isolators, can help mitigate excessive vibrations. These methods absorb or dissipate vibration energy, reducing the impact on the pillow block bearings and the surrounding equipment.
    • Improved Lubrication: Proper lubrication is essential for reducing friction and damping vibrations within pillow block bearings. Using the correct lubricant type, quantity, and application method helps maintain a stable lubrication film, minimizing vibration-induced wear.

In summary, managing misalignment and vibration in pillow block bearings involves addressing specific challenges and implementing suitable solutions. Proper installation and alignment techniques, flexible couplings, self-aligning bearings, and adjustable housings help manage misalignment. Balancing, vibration analysis and monitoring,vibration damping, and improved lubrication are effective solutions for mitigating vibration-related issues. Implementing these solutions promotes optimal performance, extends the lifespan of pillow block bearings, and ensures the smooth operation of the equipment.

pillow block bearing

What factors should be considered when selecting a pillow block bearing for a specific application?

When selecting a pillow block bearing for a specific application, several factors should be taken into consideration to ensure optimal performance and reliability. Here’s a detailed explanation of the factors that should be considered:

  • Load Requirements:
  • One of the primary factors to consider is the load requirements of the application. Determine the magnitude and direction of the loads that the bearing will be subjected to, including both radial and axial loads. This will help in selecting a pillow block bearing with the appropriate load capacity and load distribution characteristics to handle the specific application’s demands.

  • Speed and Operating Conditions:
  • Consider the speed at which the bearing will operate and the operating conditions it will be exposed to. Factors such as temperature, humidity, vibration, and contamination levels can affect bearing performance. Select a pillow block bearing that is designed to withstand the anticipated speed and operating conditions, ensuring proper lubrication, heat dissipation, and protection against external elements.

  • Shaft Size and Misalignment:
  • Take into account the shaft size and any potential misalignment that may occur during operation. Ensure that the pillow block bearing has the correct bore size to fit the shaft diameter. Additionally, consider the self-aligning capability of the bearing to accommodate any misalignments or shaft deflections that may occur. This will help prevent premature wear and failure of the bearing.

  • Environmental Factors:
  • Assess the environmental factors that the pillow block bearing will be exposed to. Consider the presence of contaminants, such as dust, dirt, moisture, or chemicals, and select a bearing with appropriate sealing or shielding options to prevent ingress and protect against corrosion. For harsh or specialized environments, consider choosing bearings with specific coatings or materials that offer enhanced resistance to corrosion, high temperatures, or aggressive substances.

  • Maintenance Requirements:
  • Consider the maintenance requirements of the application. Evaluate factors such as accessibility, lubrication intervals, and ease of bearing replacement. Select a pillow block bearing that aligns with the maintenance capabilities and resources available, ensuring that the bearing can be properly lubricated, inspected, and serviced as needed to maintain optimal performance and prolong its service life.

  • Cost and Availability:
  • While considering the technical requirements, it’s also essential to evaluate the cost and availability of the pillow block bearing. Compare the pricing and availability from different suppliers or manufacturers. Keep in mind that choosing a high-quality bearing from a reputable supplier may provide better long-term value through improved performance and durability.

By carefully considering these factors when selecting a pillow block bearing for a specific application, you can ensure that the chosen bearing meets the requirements of the application, operates reliably, and contributes to the overall efficiency and productivity of the machinery or system.

China Best Sales All Series Bearings of Spherical / Needle Roller/Thrust/ Cylindrical/ Pillow Block/Deep Groove Ball Angular Contact Ball Bearing 7220AC 7221AC 7222AC 7224AC   bearing driverChina Best Sales All Series Bearings of Spherical / Needle Roller/Thrust/ Cylindrical/ Pillow Block/Deep Groove Ball Angular Contact Ball Bearing 7220AC 7221AC 7222AC 7224AC   bearing driver
editor by CX 2024-02-20

China manufacturer Bearing Deep Groove Ball Bearing 6200 with high quality

Product Description

Introduction and use of bearings

 

Deep groove ball bearing is simple in structure and convenient in use.

It is the bearing with the largest production scale and the

widest application range.

Widely used in automobiles, household appliances, machine tools, motors, pumps, agricultural machinery, textile machinery and many other fields.

Product Name

6200 stainless steel bearing deep groove ball bearing 6200 deep groove ball bearing

Size

35x80x21mm

Material

bearing steel

Precision

P0 P5 P6

Sealing

ZZ/RS

Delivery date

Normally ready goods and stock within 3-15 days

Payment terms

A:100% TT
B: 30% T/T in advance .70% balance payment before shipment
C:Western union
D:PAYPAL

Application

Auto, tractor ,machine tool, electric machine, water pump, agricultural machinery and textile machinery

Package

Industrial package or according to buyers’ requirement

Details

Deep groove ball bearings are simple, easy to use, is the largest production volume, most widely used of a class of bearings. 

It is mainly used for a bear radial load, but also bear certain axial load. 

When the bearing radial clearance increased when the function with angular contact bearings can bear large axial load.

Special properties

1. High accuracy
2. Low noise
3. Low weight
4. Can be customized according to your needs
5. Can provide small & miniature standard and non-standard ball bearings.

Why Choose Us ?

1. 420 stainless steel for inner ring and outer ring

2. 304 stainless steel cage

3. 420 stainless steel balls

4. Dry lube/ Grease/ OilRelated Products

5. Rubber seals/ ZZ metal shields

6. High speed

7. Long spin time

8. Low friction

9. Rustproof and corrosion resistance

10. Durable

11. Easy to maintenance
Related Products

FAQ

Q1: Are you a Manufacturer or trading company?
Answer: We are professional manufactuer of bearings since 1998 with ISO standards.

 

Q2: Can I get a sample to check out the quality?
Answer: Sure, free samples are available for stock products if you can pay for the shipping cost.

 

Q3: Can you do OEM to print my logo/brand on the products?
Answer: Yes, we can print your logo/brand on the products, you just need to send us your logo/brand files, we will show you how it looks like.We can also make custom package to your request.

 

Q4: How soon can I expect my order to be finished?
Answer: We have regular stock for standard bearings that can be shipped right after your payment. It will take 15-60 days for new production order,which depends on your order quantity.

 

Q5: What if I receive defective products for my order?
Answer: All our bearings are 100% inspected strictly before packing. If any defective products received, please provide photos and video to show us the problem and help us improve the quality. New products will be sent to you as replacement if the probelm is product quality.
 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Applicable Industries: Hotels, Building Material Shops, Manufacturing PLA
Precision Rating: P0
Number of Row: Single Row
Cage and Its Materials: J Steel Stamping
Weight: 0.01 (Kg)
Sealing Cap: Double-Sided Seal
Customization:
Available

|

Customized Request

pillow block bearing

What role do pillow block bearings play in applications with varying temperature and environmental conditions?

Pillow block bearings play a crucial role in applications with varying temperature and environmental conditions by providing reliable and durable support for rotating shafts and components. Their specific contributions in such applications can be explained as follows:

  • Temperature Stability:
  • Pillow block bearings are designed to withstand a wide range of operating temperatures. They are often constructed with materials that can handle both high and low temperature extremes. Specialized heat-resistant materials, such as high-temperature alloys or heat-treated steels, are used to ensure the bearing’s stability and integrity even in applications with elevated temperatures. By maintaining their structural integrity under varying temperature conditions, pillow block bearings help ensure the continued functionality and performance of the machinery.

  • Expansion and Contraction Compensation:
  • Varying temperature conditions can cause thermal expansion and contraction of the components in machinery. Pillow block bearings are engineered to accommodate these dimensional changes. By allowing for slight movement and adjustment due to thermal expansion, they help prevent excessive stress on the shafts and other components. This compensation for thermal expansion and contraction contributes to the overall stability and longevity of the machinery, even in environments with significant temperature fluctuations.

  • Environmental Protection:
  • In applications with varying environmental conditions, pillow block bearings provide protection against contaminants, moisture, and other external elements. They often incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of dirt, dust, water, and other contaminants into the bearing. This protection helps maintain the cleanliness and integrity of the bearing’s internal components, reducing the risk of premature wear, corrosion, or damage caused by environmental factors. By safeguarding the bearing, pillow block bearings ensure reliable and efficient operation in environments with varying conditions.

  • Corrosion Resistance:
  • In corrosive environments where moisture, chemicals, or other corrosive agents are present, pillow block bearings with corrosion-resistant materials, such as stainless steel or special coatings, offer additional protection. These bearings are designed to withstand the corrosive effects of the environment, preventing degradation and maintaining their functionality over an extended period. By providing corrosion resistance, pillow block bearings enhance the reliability and lifespan of machinery operating in environments with varying temperature and corrosive conditions.

  • Shock and Vibration Absorption:
  • Applications with varying temperature and environmental conditions often involve machinery subjected to shocks and vibrations. Pillow block bearings are engineered to absorb and dampen these shocks and vibrations, reducing their impact on the rotating shafts and other components. This absorption capability helps prevent excessive stress, minimizes the risk of component failure, and ensures the smooth and reliable operation of the machinery, even in environments with dynamic conditions.

  • Maintenance and Longevity:
  • Pillow block bearings designed for applications with varying temperature and environmental conditions often incorporate features that simplify maintenance and extend bearing life. They may have lubrication systems or self-lubricating properties that ensure proper lubrication even in challenging environments. Additionally, they may be designed for easy inspection, cleaning, and replacement, allowing for timely maintenance and minimizing downtime. These features contribute to the longevity and reliability of the machinery in applications with varying temperature and environmental conditions.

In summary, pillow block bearings play a critical role in applications with varying temperature and environmental conditions by providing temperature stability, compensating for expansion and contraction, protecting against contaminants and corrosion, absorbing shocks and vibrations, and facilitating maintenance and longevity. Their ability to withstand and adapt to changing conditions ensures the reliable operation and extended lifespan of machinery in diverse environments.

pillow block bearing

Can you provide examples of scenarios where easy mounting and dismounting are crucial with pillow block bearings?

Easy mounting and dismounting of pillow block bearings are crucial in various scenarios where maintenance, repair, or replacement of bearings is required. Here are some examples of situations where easy mounting and dismounting are particularly important:

  • Field Maintenance:
  • In industries such as agriculture, construction, and mining, equipment often operates in remote or challenging locations. In these scenarios, quick and easy mounting and dismounting of pillow block bearings are essential for efficient field maintenance. Bearings may need to be replaced or serviced on-site to minimize downtime and keep the equipment operational. Easy access to the bearings and straightforward mounting and dismounting procedures enable maintenance personnel to perform these tasks effectively and swiftly.

  • Conveyor Systems:
  • Conveyor systems are widely used in industries such as manufacturing, warehousing, and logistics. These systems consist of numerous pillow block bearings that support the conveyor rollers or pulleys. In situations where a bearing fails or requires maintenance, easy mounting and dismounting are crucial to minimize disruption to the production or material handling process. Efficient replacement of the bearing allows the conveyor system to resume operation quickly and ensures smooth material flow.

  • High-Speed Machinery:
  • In applications involving high-speed machinery, such as paper mills, printing presses, or textile machinery, easy mounting and dismounting of pillow block bearings are important. These machines often operate at high rotational speeds, and any downtime for bearing replacement or maintenance can have a significant impact on productivity. Quick and hassle-free mounting and dismounting procedures allow maintenance teams to swiftly address bearing issues and restore the machinery to its optimal performance.

  • Service and Repair Workshops:
  • Service and repair workshops that handle a wide range of equipment from different industries benefit from easy mounting and dismounting of pillow block bearings. These workshops often deal with various machinery types and sizes, and having a streamlined process for bearing replacement or maintenance is crucial to ensure efficient service delivery. Easy mounting and dismounting procedures simplify the workflow, reduce labor time, and enhance overall operational efficiency.

  • Equipment with Limited Access:
  • Some equipment may have limited access to the bearings due to space constraints or design considerations. Examples include compact machinery, enclosed systems, or installations with complex configurations. In such cases, easy mounting and dismounting of pillow block bearings become even more critical. Simplified procedures and accessible mounting points facilitate the replacement or maintenance of bearings in these challenging environments.

In summary, easy mounting and dismounting of pillow block bearings are crucial in scenarios where efficient maintenance, repair, or replacement of bearings is required. This includes field maintenance, conveyor systems, high-speed machinery, service and repair workshops, and equipment with limited access. By enabling quick and hassle-free procedures, easy mounting and dismounting of pillow block bearings contribute to minimizing downtime, optimizing equipment performance, and ensuring smooth operations in various industries and applications.

pillow block bearing

What are pillow block bearings and how are they used in various industrial applications?

Pillow block bearings, also known as plummer block bearings, are a type of bearing mounted inside a housing or block, typically made of cast iron or pressed steel. These bearings are widely used in various industrial applications due to their versatility and ease of installation. Here’s a detailed explanation of pillow block bearings and their uses:

  • Design and Construction:
  • A pillow block bearing consists of a bearing insert (such as a deep groove ball bearing, spherical roller bearing, or cylindrical roller bearing) and a housing or block. The housing is typically a split design that allows for easy installation and maintenance. It usually has a flat base with mounting holes for attachment to a support structure, such as a machine frame or conveyor system. The bearing insert is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts.

  • Supporting Shaft Loads:
  • Pillow block bearings are primarily used to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the pillow block bearing allows for self-aligning capability, which helps accommodate slight misalignments or shaft deflections, ensuring smooth operation and reducing stress on the bearing.

  • Easy Installation and Maintenance:
  • One of the key advantages of pillow block bearings is their ease of installation and maintenance. The split housing design allows for quick assembly and disassembly without the need to remove other components or disassemble the entire system. This feature simplifies bearing replacement, lubrication, and inspection, reducing downtime and maintenance costs in industrial applications.

  • Versatility and Adaptability:
  • Pillow block bearings are highly versatile and adaptable to various industrial applications. They can be found in a wide range of industries, including manufacturing, mining, agriculture, construction, and material handling. These bearings are used in conveyor systems, power transmission equipment, pumps, fans, compressors, and many other rotating machinery applications.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. Additionally, the housing design often includes provisions for grease or oil lubrication, further protecting the bearing and ensuring proper lubrication for optimal performance.

  • Specialized Variations:
  • While the basic design of pillow block bearings remains the same, there are specialized variations available to meet specific application requirements. These include corrosion-resistant bearings for harsh environments, high-temperature bearings for elevated temperature applications, and sealed bearings for applications where additional protection against contamination is needed.

In summary, pillow block bearings are bearing units housed in a block or housing, widely used in various industrial applications. They provide support for rotating shafts, transmit loads, accommodate misalignments, and offer easy installation and maintenance. Their versatility, adaptability, and environmental protection make them suitable for diverse industrial sectors. With specialized variations available, pillow block bearings can be customized to meet specific application needs, ensuring reliable and efficient operation in a wide range of industrial machinery and equipment.

China manufacturer Bearing Deep Groove Ball Bearing 6200   with high qualityChina manufacturer Bearing Deep Groove Ball Bearing 6200   with high quality
editor by CX 2024-02-05

China manufacturer Deep Groove Ball/Self Aligning/ Thrust/Angular Contact/Ball Bearing/Taper/Cylindrical Roller/ Pillow Block/Self Aligning/Needle/Roller Bearing/Wheel Hub Bearing double row ball bearing

Product Description

Product Description

We provide all sizes of tapered roller bearing. And they are produced by professional bearing steel to extend serice life. 
They are with the following advantages.
1.low friction coefficient, low noise, low vibration
2.high rotational speeds
3.accommodate radial and axial loads
3.easy to install
4.low maintenance frequency

 

Tapered roller bearing is mainly used to bear radial load,but it can also accommodate combined load. The outer ring is separated and easy to assemble. The axial load carrying capacity of the bearing is largely determined by the contact angle.The larger the angle is the higher axial load carrying capacity. 

Application
They are widely used by the field of Aerospace, Agriculture, Automotive, Construction, Electric Motor, Food and Beverage,Heavy Duty Truck, Infrastructure, Machine Tool, Metal Manufacturing,
Mining and Aggregate, Paper and Forestry, Rail and Transit, Wind Energy.
 

 

Tapered Roller Bearing
30000 Series Tapered Roller Bearing
Bearing No. Dimensions(mm) Weight(kg)
  d D T  
35712 15 35 11 0.053
35713 17 40 13.25 0.079
35714 20 47 15.25 0.126
35715 25 52 16.25 0.154
35716 30 62 17.25 0.231
35717 35 72 18.25 0.331
35718 40 80 19.75 0.422
35719 45 85 20.75 0.474
35710 50 90 21.75 0.529
35711 55 100 22.75 0.713
35712 60 110 23.75 0.904
35713 65 120 24.75 1.13
35714 70 125 26.25 1.26
35715 75 130 27.25 1.36
35716 80 140 28.5 1.65
35717 85 150 31 2.1
35718 90 160 33 2.52
35719 95 170 35 3.17
35710 100 180 37.5 3.8
35711 105 190 39.5 4.5
35712 110 200 41.5 5.16
35714 120 215 44 6.27
30302 15 42 13 0.098
30303 17 47 15.25 0.129
30304 20 52 16.25 0.165
30305 25 62 18.25 0.263
30306 30 72 20.75 0.387
30307 35 80 22.75 0.515
30308 40 90 25.25 0.747
30309 45 100 27.25 0.984
3571 50 110 29.25 1.28
3571 55 120 31.5 1.63
3571 60 130 33.5 1.99
3571 65 140 36 2.44
3571 70 150 38 2.98

31000 Series Tapered Roller Bearing
Bearing No. Dimensions(mm) Weight
  d D B  
31303 17 47 15 0.13
31304 20 52 16.5 0.17
31305 25 62 18.5 0.26
31306 30 72 21 0.38
31307 35 80 23 0.517
31308 40 90 25.5 0.66
31309 45 100 27.5 0.974
31310 50 110 29.5 1.23
31311 55 120 32 1.5
31312 60 130 34 1.92
31313 65 140 36.5 2.29
31314 70 150 38.5 2.87
31315 75 160 40 3.43
31316 80 170 42.5 4.09
31317 85 180 45 4.91

 

32000 Series Tapered Roller Bearing
Bearing No. Dimensions(mm) Weight
  d D B  
32203 17 40 17.25 0.102
32204 20 47 19.25 0.16
32205 25 52 19.25 0.187
32206 30 62 21.25 0.287
32207 35 72 24.25 0.445
32208 40 80 24.75 0.532
32209 45 85 24.75 0.573
32210 50 90 24.75 0.626
32211 55 100 26.75 0.853

 

 

33000 Series Tapered Roller Bearing
Bearing No. Dimensions(mm) Weight
  d D B  
33005 25 47 17 0.129
33006 30 55 20 0.201
33007 35 62 21 0.25
33008 40 68 22 0.306
33009 45 75 24 0.398
33571 50 80 24 0.433
33011 55 90 27 0.651
33012 60 95 27 0.691
33013 65 100 27 0.732
33014 70 110 31 1.07
33015 75 115 31 1.12
33016 80 125 36 1.63
33017 85 130 36 1.75
33018 90 140 39 2.157
33019 95 145 39 2.3
33571 100 150 39 2.4
33206 30 62 25 0.355
33207 35 72 28 0.524
33208 40 80 32 0.715
33209 45 85 32 0.77
33210 50 90 32 0.867
33211 55 100 35 1.18
33212 60 110 38 1.56
33213 65 120 41 2.04
33214 70 125 41 2.15
33215 75 130 41 2.25
33216 80 140 46 2.94
33217 85 150 49 3.56
33218 90 160 55 4.69
33219 95 170 58 5.54
33220 100 180 63 6.4

Our Advantages

 

1.Professional supplier: we are a professional bearing supplier in China. Besides of our own factory, we also have a stable supply chain to provide all types of bearing.

2.Quality: we can supply bearing with world-class quality.

3.OEM or Non-Standard Bearing: OEM & Non-Standard bearing are available.

4.Professional teams:we have professional teams with technology, research and production.

5. Quick delivery: we can provide the shortest delivery time.
 

Packaging & Shipping

Packaging: 1. Inner plastic bags+ Cartons+Pallets
                   2.Tube packed
                   3. Customized designs
                   4.Industrial packing

 

Company Profile

 

ZheJiang Dente International Trade Co.,Ltd is a comprehensive enterprise with factory and trading company. It was founded in HangZhou City, ZheJiang province, China. HangZhou city is also well known as Kite Capital of the World. Since the establishment, we are focusing on import and export business based on our own bearing factory which is located in HangZhou City where is the largest bearing wholesale base in China.

Our company is specialized in developing various bearings which include deep groove ball bearings, tapered roller bearings, outer spherical bearings, self-aligning ball bearings, spherical roller bearings, cylindrical roller bearings, thrust ball bearings, non-standard bearings of automobiles. Simultaneously we also supply needle roller bearings, stainless steel bearings ,inch series bearings, non-standard bearings, the series of special bearings, imported bearings of global famous brand.

Besides of our own factory and professional exporting experiences, we also cooperate with more than 500 bearing factories to meet customers’ various requirements. Therefore, our company is with the advantage of providing bearings with high quality, short delivery period, but competitive price. Our products have been selling well in more than 50 countries in the world, which include Europe, North America, South America, Australia, Africa, etc.

Our company mission is to supply high-quality bearings with competitive price for customers. And our company philosophy is based on excellent service, quick feedback, working sincerely, and team work. We hope to create a beautiful future together with customers.

Your satisfaction is our goal, expecting your inquiries.

 

 

 

 

FAQ

 

1.who are you?

We are a professional supplier of bearing in China. ZheJiang Dente International Trade Co.,Ltd

2.Are you a Manufacturer or trading company?

We are a comprehensive enterprise with factory and trading company.

3.Can I get a sample to check out the quality?
Sure, free samples are available for stock products if you pay for the shipping cost.

4.What is your delivery time?
Most orders will be shipped within 7-15 days of payment being received.

Any problems, pls feel free to contact us.
 

Precision: P0, P6, P5, P4, P2
Clearance: C0, C2, C3, C4, C5
OEM: Acceptable
Samples:
US$ 0.6/Set
1 Set(Min.Order)

|

Order Sample

Various types are available
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pillow block bearing

How do pillow block bearings contribute to the proper functioning of food processing equipment?

Pillow block bearings play a crucial role in ensuring the proper functioning of food processing equipment. They provide reliable support and smooth operation for rotating shafts and components in various stages of food processing. Here are the key contributions of pillow block bearings to the proper functioning of food processing equipment:

  • Sanitary Design:
  • In food processing environments, maintaining strict hygiene standards is essential. Pillow block bearings designed for food processing equipment are constructed with materials and features that adhere to sanitary requirements. They are often made from stainless steel or other corrosion-resistant materials that are easy to clean and withstand frequent washdowns. Additionally, these bearings have smooth surfaces, rounded edges, and minimal crevices to prevent the accumulation of food particles, debris, or bacteria. The sanitary design of pillow block bearings ensures the integrity and cleanliness of the equipment, minimizing the risk of contamination and ensuring compliance with food safety regulations.

  • Reliable Performance:
  • Food processing equipment operates under demanding conditions, including high production rates, heavy loads, and frequent start-stop cycles. Pillow block bearings are designed to withstand these challenges and provide reliable performance. They offer excellent load-bearing capacity, shock resistance, and vibration damping capabilities. This ensures smooth and stable operation of rotating shafts, reducing the risk of equipment failure, downtime, and production interruptions. By contributing to the reliable performance of food processing equipment, pillow block bearings support efficient and uninterrupted food processing operations.

  • Corrosion Resistance:
  • Food processing environments often involve exposure to moisture, chemicals, and cleaning agents. Pillow block bearings designed for food processing equipment are highly resistant to corrosion and chemical attack. They are made from materials that can withstand the corrosive effects of food acids, cleaning solutions, and other substances encountered in the processing area. The corrosion resistance of these bearings helps maintain their structural integrity, extends their lifespan, and ensures reliable performance even in harsh operating conditions.

  • Contamination Prevention:
  • Preventing contamination is of utmost importance in food processing. Pillow block bearings incorporate sealing mechanisms, such as rubber seals or labyrinth seals, to prevent the entry of contaminants into the bearing housing. These seals provide a barrier against dirt, dust, moisture, and other external elements, minimizing the risk of contamination of the food products. The effective sealing of pillow block bearings helps maintain the cleanliness and purity of the processing environment, safeguarding the quality and safety of the food products.

  • Easy Maintenance:
  • Maintenance and cleanliness are critical in food processing equipment. Pillow block bearings are designed for easy maintenance, inspection, and cleaning. They often have features such as grease fittings or lubrication access points that facilitate the replenishment of lubricants without disassembling the bearing. This simplifies routine maintenance tasks and allows for timely lubrication, ensuring optimal bearing performance. The ease of maintenance of pillow block bearings contributes to the overall efficiency and reliability of food processing equipment.

  • Versatility:
  • Food processing equipment encompasses a wide range of applications, such as mixing, grinding, conveying, and packaging. Pillow block bearings offer versatility and can be used in various equipment types and configurations. They are available in different sizes, load capacities, and mounting options to accommodate the specific requirements of different food processing applications. The versatility of pillow block bearings allows for their integration into diverse equipment designs, supporting the proper functioning of food processing machinery.

In summary, pillow block bearings contribute to the proper functioning of food processing equipment by offering a sanitary design, ensuring reliable performance, providing corrosion resistance, preventing contamination, enabling easy maintenance, and offering versatility. By fulfilling these roles, pillow block bearings support the efficient, hygienic, and uninterrupted operation of food processing equipment while maintaining the highest standards of food safety and quality.

pillow block bearing

How do different types of pillow block bearings, like split and solid, differ in terms of design and functionality?

Different types of pillow block bearings, such as split and solid designs, exhibit variations in their design and functionality. Here’s a detailed explanation of how these types differ:

  • Split Pillow Block Bearings:
  • Split pillow block bearings, also known as split plummer block bearings, are designed with a split housing that allows for easy mounting and dismounting without the need to remove other components or disassemble the shaft. The housing is divided into two or more parts, typically split horizontally or vertically, which can be separated to access the bearing. The split design offers several advantages:

    • Easy Installation and Maintenance: Split pillow block bearings simplify the installation and maintenance process by providing convenient access to the bearing without dismantling the shaft or surrounding equipment. This feature is particularly beneficial in scenarios where quick and efficient bearing replacement or inspection is required.
    • Space Constraints: Split bearings are advantageous in applications where space limitations make it challenging to maneuver or remove solid bearings. The split design allows for easy insertion and removal of the bearing, even in confined spaces.
    • Shaft Alignment: Split pillow block bearings often incorporate features that assist with shaft alignment. This ensures proper alignment between the rotating shaft and the bearing, reducing friction, wear, and vibration.
    • Temperature Expansion: The split housing design accommodates thermal expansion or contraction of the bearing components. This capability is particularly important in applications where temperature variations occur, preventing potential damage or misalignment due to thermal effects.
  • Solid Pillow Block Bearings:
  • Solid pillow block bearings, also referred to as solid plummer block bearings, have a one-piece housing that encloses the bearing. The housing is typically made of cast iron, ductile iron, or other durable materials. Solid pillow block bearings offer the following characteristics:

    • Stability and Strength: Solid bearings provide a robust and rigid housing, offering excellent stability and support for the bearing and the shaft. They are capable of handling high loads and resisting deformation or deflection under heavy operating conditions.
    • Environmental Protection: The solid housing design provides enhanced protection against contaminants, moisture, and debris. It helps to shield the bearing from external elements, reducing the risk of premature wear, corrosion, or damage.
    • Sealing Options: Solid pillow block bearings often feature various sealing options, such as rubber seals, felt seals, or labyrinth seals. These seals help to retain the lubricant and prevent the ingress of contaminants, maintaining the integrity and performance of the bearing.
    • Design Variations: Solid bearings are available in different configurations and styles to accommodate specific application requirements. This includes variations in the shape, dimensions, mounting methods, and sealing arrangements of the housing.

In summary, split pillow block bearings and solid pillow block bearings differ in their design and functionality. Split bearings offer easy installation and maintenance, space-saving advantages, assistance with shaft alignment, and accommodation for temperature expansion. On the other hand, solid bearings provide stability, strength, environmental protection, sealing options, and various design variations. The choice between these types depends on the specific application needs, including accessibility requirements, load capacity, environmental conditions, and maintenance considerations.

pillow block bearing

How does proper lubrication impact the performance and longevity of pillow block bearings?

Proper lubrication plays a crucial role in the performance and longevity of pillow block bearings. It ensures smooth operation, reduces friction and wear, dissipates heat, and protects against corrosion. Here’s a detailed explanation of how proper lubrication impacts the performance and longevity of pillow block bearings:

  • Reduced Friction and Wear:
  • Lubrication forms a thin film between the rolling elements and the raceways of the pillow block bearing. This film of lubricant reduces friction and minimizes wear by providing a lubricating barrier between the moving surfaces. Reduced friction results in lower energy consumption, less heat generation, and decreased wear on the bearing components, leading to improved performance and prolonged service life.

  • Heat Dissipation:
  • During operation, pillow block bearings can generate heat due to the friction between the rolling elements and the raceways. Proper lubrication helps to dissipate this heat by carrying it away from the bearing surfaces. Effective heat dissipation prevents excessive temperature rise, which can cause lubricant degradation, thermal expansion, and accelerated wear. By maintaining proper lubrication, the pillow block bearing can operate within the desired temperature range, ensuring optimal performance and preventing premature failure.

  • Protection Against Corrosion:
  • Lubrication provides a protective barrier that helps to prevent corrosion and rust formation on the bearing surfaces. Corrosion can occur when moisture or contaminants penetrate the bearing and react with the metal surfaces. The lubricant acts as a barrier, preventing direct contact between the metal surfaces and the external environment, thus inhibiting corrosion and preserving the integrity of the bearing components. Proper lubrication with corrosion-resistant lubricants is particularly important in environments with high humidity, exposure to water, or corrosive substances.

  • Prevention of Contamination:
  • Pillow block bearings are susceptible to contamination from dust, dirt, and other particles present in the operating environment. Proper lubrication with appropriate sealing or shielding options helps to prevent the ingress of contaminants into the bearing. The lubricant forms a protective barrier, sealing off the bearing and reducing the risk of particle intrusion. By minimizing contamination, proper lubrication helps to maintain the smooth operation and integrity of the bearing, preventing premature wear and failure.

  • Extended Service Life:
  • By ensuring proper lubrication, the performance and longevity of pillow block bearings can be significantly improved. Proper lubrication reduces friction, wear, and heat, while providing protection against corrosion and contamination. These factors collectively contribute to the extended service life of the bearing. Regular lubrication maintenance, including monitoring the lubricant condition, replenishing or replacing the lubricant as necessary, and following the manufacturer’s recommendations, helps to maximize the service life of the pillow block bearing and optimize its performance.

In summary, proper lubrication is essential for the performance and longevity of pillow block bearings. It reduces friction and wear, dissipates heat, protects against corrosion, and prevents contamination. By maintaining proper lubrication, the pillow block bearing operates smoothly, experiences less wear, and remains protected from external factors, leading to improved performance, extended service life, and enhanced reliability.

China manufacturer Deep Groove Ball/Self Aligning/ Thrust/Angular Contact/Ball Bearing/Taper/Cylindrical Roller/ Pillow Block/Self Aligning/Needle/Roller Bearing/Wheel Hub Bearing   double row ball bearingChina manufacturer Deep Groove Ball/Self Aligning/ Thrust/Angular Contact/Ball Bearing/Taper/Cylindrical Roller/ Pillow Block/Self Aligning/Needle/Roller Bearing/Wheel Hub Bearing   double row ball bearing
editor by CX 2023-11-17

China Good quality CZPT CZPT CZPT All Series Bearings of Spherical / Needle Roller/Thrust/ Cylindrical/ Pillow Block Ball /Deep Groove Ball/ Auto/ Angular Contact Rolling Bearing bearing bronze

Product Description

The whole production process from raw materials to finished products, from design to manufacturing, is produced in accordance with national standards. The main production: spherical roller bearings, insert bearings, housings, deep groove ball bearings, adapter sleeves, cylindrical roller bearings and so on.

Bearing Manufacturer:

1. Free Sample bearing;
2.ISO Standard;
3. Bearing Small order accepted;
4. In Stock bearing;
5. OEM/ODM bearing service;
6. Professional: more than 20 years of manufacture bearing;
7. Customized bearing, Customer’s bearing drawing or samples accepted;
8. Competitive price bearing: factory outlet.

OEM All Brand Bearing

1. deep groove ball bearing 6000,6200,6300,6400,61800,61900,Z,RS,ZZ,2RS
2. spherical roller bearing 22200,22300,23000,24000,23100,24100,CA,CC,E,W33
3. cylindrical roller bearing N,NU,NJ,NN,NUP,E,ECP,ECM,ECJ
4. taper roller bearing 35710,30300,32200,32300,31300,32000
5. Aligning ball bearing 1200,1300,2200,2300,
6. needle roller bearing NA,NAV,NK,NKI,RNA,NK,RNAV,ZKLF,ZKLN,ZARF,ZARN
7. thrust ball bearing 51100,51200,51300,51400,E,M
8. angular contact ball bearing7000,7100,7200,7300,AC,BECBM,C 
9. spherical plain bearing GE,GEG,GEEW,U,UC,UG,GX,GAC,SA,SABP
10.Wheel hub bearing /ceramic bearing/plastic bearing/lazy susan bearing
 

Product Description

1)Series: 222 series, 223 series, 230 series, 231 series,232 series,239 series,240 series,241series.
2)Material Used: GCr15, Carbon steel
3)Cage: Brass (MB, MA, CA), steel (CC, E, E1)
4)Clearance: C2,C0,C3,C4,C5
5)Precision level: P0, P6, P5

Bearing No. 

Dimensions (mm)

Basic load rating Limiting speed(r/min) Weight (kg)

Cylindrical Bore

Taper Bore

D

D

B

Rmin

Cr

Cor

Grease

Oil

22 Series

22208CC

22208CCK

40

80

23

1.1

77.0

88.5

5000

6300

0.524

22209CC

22209CCK

45

85

23

1.1

80.5

95.2

4500

6000

0.571

22210CC

22210CCK

50

90

23

1.1

83.8

102.0

4300

5300

0.614

22211CC

22211CCK

55

100

25

1.5

102.0

125.0

3800

5000

0.847

22212CC

22212CCK

60

110

28

1.5

122.0

155.0

3600

4500

1.150

22213CC

22213CCK

65

120

31

1.5

150.0

195.0

3200

4000

1.540

22214CC

22214CCK

70

125

31

1.5

150.0

195.0

3000

3800

1.600

22215CC

22215CCK

75

730

31

1.5

162.0

215.0

3000

3800

1.690

22216CC

22216CCK

80

140

33

2.0

175.0

235.0

2800

3400

2.130

22217CC

22217CCK

85

150

36

2.0

212…0

282.0

2600

3200

2.670

22218CC

22218CCK

90

160

40

2.0

250.0

338.0

2400

3000

3.380

23 Series 

 

22308CC

22308CCK

40

90

33

1.5

120.0

138.0

4500

6000

1.571

22309CC

22309CCK

45

100

36

1.5

142.0

170.0

4000

5300

1.370

22310CC

22310CCK

50

110

40

2.0

178.0

212.0

3800

4800

1.790

22311CC

22311CCK

55

120

43

2.0

210.0

252.0

3400

4300

2.310

22312CC

22312CCK

60

130

46

2.1

242.0

292.0

3200

4000

2.880

22313CC

22313CCK

65

140

48

2.1

265.0

320.0

3000

3800

3.470

22314CC

22314CCK

70

150

51

2.1

312.0

395.0

2800

3400

4.340

22315CC

22315CCK

75

160

55

2.1

348.0

448.0

2600

3200

5.280

 

22215K/MBW33 22208CCW33C3 23222MBW33 23044MBW33
22220MBW33 22209CCW33C3 24124MBW33 23140MBW33
22320MBW33 22210CCW33C3 24126MBW33 22332MBW33
22315MBW33 22211CCW33C3 23230MBW33 22318MBW33
22316K/MBW33 22212CCW33C3 22326MAW33 22232KMBW33
22224MBW33 22213CCW33C3 23036MBW33 22340MBW33
22326MBW33 22214CCW33C3 23134MBW33 23222K/MBW33
22218MBW33 22215CCW33C3 29415M 23224K/MBW33
23124MBW33 22216CCW33C3 29416M 23230KMBW33
24026MBW33 22217CCW33C3 22230KMBW33 29426M
22222K/MBW33 22218CCW33C3 23038MBW33 23134K/MBW33
23126MBW33 22219CCW33C3 29418M 23038K/MBW33
24571MBW33 22220CCW33C3 29420M 23128MBW33
24030MBW33 22222CCW33C3 23224MBW33 23128K/MBW33
22324MAW33 22224CCW33C3 22226K/MBW33 22234KMBW33
23220MBW33 22226CCW33C3 22322MAW33 22236K/MBW33
24571MBW33 22228CCW33C3 23226MBW33 22330MAW33
22318MAW33 22230CCW33C3 24032MBW33 29424M
22226MBW33 22212MBW33C3 29422M 23036K/MBW33
22319MBW33 22213MBW33C3 23130MBW33 23048MBW33
22324MBW33 22214MBW33C3 24032K/MBW33 22320MAW33
22328MBW33 22215MBW33C3 23232MBW33 22240MBW33
22218MBW33C3 22216MBW33C3 23138MBW33  
22236MBW33 22217MBW33C3    

Our packing: 
* Industrial pakage+outer carton+pallets
* sigle box+outer carton+pallets
* Tube package+middle box+outer carton+pallets
* According to your requirments

Other products

Company Profile

ABOUT US

BEARING MANUFACTURE

1. 20+ years of experience in manufacturing bearing;
2.Annual output value of more than 40 million yuan;
3.Passed the ISO9001 international quality certification system;
4.160 sets imported production equipments;
5.Professional sales team.

We have been engaged in foreign trade for more than 6 years and are well-known enterprises in ZheJiang Province. The fixed assets of the machine are more than 2 million US dollars, and the annual foreign trade Sales volume exceeds 2 million US dollars. 
We have extensive cooperation with countries in Asia, Europe, and the Americas. Including Russia, Ukraine, Elarus, Kazakhstan, Uzbekistan, Tajikistan, Spain, Mexico, India, Pakistan, Turkey, Vietnam and other industrial Areas.

Honor and Certification
Rated as an excellent company in the local area, and both quality and management systems have been recognized.

FAQ

SAMPLES

1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS mix different standard bearings. 
2. MOQ: 3000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info. 

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks! 

We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement. 

Feature: Best Price, High Speed, Long Life
OEM: Available
Vibration: Z1V1 Z2V2 Z3V3
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

pillow block bearing

What considerations are important when selecting the appropriate size and housing material for a pillow block bearing?

When selecting the appropriate size and housing material for a pillow block bearing, several considerations are important to ensure optimal performance and reliability. Here are the key factors to consider:

  • Load Capacity:
  • Determine the anticipated load that the pillow block bearing will be subjected to. Consider both the magnitude and direction of the load. This information is crucial for selecting a bearing with the appropriate load capacity. It ensures that the bearing can handle the applied loads without premature wear or failure.

  • Shaft Size and Fit:
  • Take into account the size and tolerance of the shaft that the bearing will be mounted on. The bearing and shaft should have compatible dimensions and proper fit. Consider factors such as shaft diameter, tolerance, and shape to ensure a secure and accurate fit between the bearing and the shaft.

  • Operating Speed:
  • Understand the expected operating speed of the application. Different pillow block bearings are designed to handle specific speed ranges. Ensure that the selected bearing’s speed rating is suitable for the anticipated operating conditions. Operating the bearing within its speed limitations prevents excessive heat generation and premature failure.

  • Environmental Conditions:
  • Evaluate the environmental factors that the pillow block bearing will be exposed to. Consider aspects such as temperature extremes, humidity, dust, chemicals, and potential contaminants. Choose a bearing and housing material that can withstand the specific environmental conditions to ensure long-term durability and optimal performance.

  • Corrosion Resistance:
  • If the application is exposed to corrosive elements, select a pillow block bearing with appropriate corrosion resistance. Stainless steel or other corrosion-resistant materials may be necessary to prevent degradation and maintain the functionality of the bearing in such environments.

  • Housing Material:
  • Consider the housing material for the pillow block bearing. Common housing materials include cast iron, stainless steel, thermoplastic, and composite materials. The choice of housing material depends on factors such as load requirements, environmental conditions, corrosion resistance, and cost considerations. Each housing material has its own advantages and limitations, so select the most suitable material for the specific application.

  • Lubrication:
  • Identify the lubrication requirements of the pillow block bearing. Some bearings may require periodic lubrication, while others are designed to be maintenance-free or self-lubricating. Consider the availability of lubrication access points and the ease of lubrication when selecting the bearing and housing. Proper lubrication ensures smooth operation, reduces friction, and extends the bearing’s lifespan.

By carefully considering these factors when selecting the appropriate size and housing material for a pillow block bearing, you can ensure compatibility, performance, and longevity in the specific application. Consulting with bearing manufacturers, engineers, or industry experts can provide valuable guidance in making the optimal selection for your specific requirements.

pillow block bearing

What are the challenges and solutions for managing misalignment and vibration in pillow block bearings?

Misalignment and vibration pose challenges in the proper functioning and longevity of pillow block bearings. However, there are solutions available to address these issues. Let’s explore the challenges and corresponding solutions for managing misalignment and vibration:

  • Misalignment Challenges:
  • Misalignment occurs when the shaft and the bearing are not perfectly aligned. This can result from various factors, including improper installation, thermal expansion, shaft deflection, or external forces. The challenges associated with misalignment include:

    • Increased Friction and Wear: Misalignment causes uneven loading and increased friction between the bearing and the shaft. This can lead to accelerated wear, premature bearing failure, and reduced equipment performance.
    • Excessive Heat Generation: Misalignment generates additional heat due to increased friction. This heat can negatively impact the lubrication, leading to lubricant breakdown and reduced bearing life.
    • Vibration and Noise: Misaligned pillow block bearings can contribute to vibration and noise in the equipment. Excessive vibration can cause further damage to the bearing and other components, affecting the overall system’s stability and performance.
  • Misalignment Solutions:
  • To manage misalignment in pillow block bearings, several solutions can be implemented:

    • Proper Installation and Alignment: Ensuring correct installation procedures and alignment techniques during initial setup or bearing replacement is crucial. This includes aligning the shaft and the bearing within specified tolerances using alignment tools and techniques such as laser alignment or dial indicators.
    • Flexible Couplings: Flexible couplings can compensate for minor misalignments between the driving and driven components. These couplings allow for angular, parallel, and axial misalignment, reducing the transmitted misalignment to the pillow block bearings.
    • Self-Aligning Bearings: Some pillow block bearings are designed with self-aligning capabilities. These bearings can accommodate small amounts of misalignment without significant adverse effects. Self-aligning bearings utilize specialized internal geometries or spherical outer rings to maintain proper alignment under certain misalignment conditions.
    • Adjustable Bearing Housings: Certain pillow block bearing designs incorporate adjustable housings that allow for fine-tuning the alignment. These housings provide additional flexibility in aligning the bearing to the shaft, compensating for misalignment during operation.
  • Vibration Challenges:
  • Vibration refers to the oscillation or shaking of the bearing and the surrounding equipment. Excessive vibration can contribute to various issues:

    • Increased Friction and Wear: Vibrations can lead to higher levels of friction and wear within the bearing, potentially causing premature failure and reduced operational lifespan.
    • Structural Fatigue: Prolonged exposure to excessive vibration can lead to structural fatigue in the bearing housing, shaft, and other connected components. This can result in cracks, deformations, or even catastrophic failures.
    • Unstable Operation: Excessive vibration can negatively impact the stability and performance of the equipment. It can affect accuracy, precision, and overall system functionality.
  • Vibration Solutions:
  • Managing vibration in pillow block bearings involves implementing the following solutions:

    • Balancing: Balancing rotating components, such as shafts, pulleys, or rotors, reduces vibration caused by uneven weight distribution. Dynamic balancing techniques, including static and dynamic analysis, can identify and correct imbalances, minimizing vibration levels.
    • Vibration Analysis and Monitoring: Regular vibration analysis and monitoring can help detect and diagnose vibration issues in pillow block bearings. This involves using vibration sensors and analyzing the data to identify potential problems early on, allowing for timely corrective actions.
    • Vibration Damping: Employing vibration damping techniques, such as the use of vibration-absorbing materials or isolators, can help mitigate excessive vibrations. These methods absorb or dissipate vibration energy, reducing the impact on the pillow block bearings and the surrounding equipment.
    • Improved Lubrication: Proper lubrication is essential for reducing friction and damping vibrations within pillow block bearings. Using the correct lubricant type, quantity, and application method helps maintain a stable lubrication film, minimizing vibration-induced wear.

In summary, managing misalignment and vibration in pillow block bearings involves addressing specific challenges and implementing suitable solutions. Proper installation and alignment techniques, flexible couplings, self-aligning bearings, and adjustable housings help manage misalignment. Balancing, vibration analysis and monitoring,vibration damping, and improved lubrication are effective solutions for mitigating vibration-related issues. Implementing these solutions promotes optimal performance, extends the lifespan of pillow block bearings, and ensures the smooth operation of the equipment.

pillow block bearing

What are pillow block bearings and how are they used in various industrial applications?

Pillow block bearings, also known as plummer block bearings, are a type of bearing mounted inside a housing or block, typically made of cast iron or pressed steel. These bearings are widely used in various industrial applications due to their versatility and ease of installation. Here’s a detailed explanation of pillow block bearings and their uses:

  • Design and Construction:
  • A pillow block bearing consists of a bearing insert (such as a deep groove ball bearing, spherical roller bearing, or cylindrical roller bearing) and a housing or block. The housing is typically a split design that allows for easy installation and maintenance. It usually has a flat base with mounting holes for attachment to a support structure, such as a machine frame or conveyor system. The bearing insert is pre-mounted inside the housing and provides the rotating element to support shafts or other moving parts.

  • Supporting Shaft Loads:
  • Pillow block bearings are primarily used to support rotating shafts and transmit loads between the shaft and the housing. They are capable of handling both radial and axial loads, depending on the type of bearing insert used. The design of the pillow block bearing allows for self-aligning capability, which helps accommodate slight misalignments or shaft deflections, ensuring smooth operation and reducing stress on the bearing.

  • Easy Installation and Maintenance:
  • One of the key advantages of pillow block bearings is their ease of installation and maintenance. The split housing design allows for quick assembly and disassembly without the need to remove other components or disassemble the entire system. This feature simplifies bearing replacement, lubrication, and inspection, reducing downtime and maintenance costs in industrial applications.

  • Versatility and Adaptability:
  • Pillow block bearings are highly versatile and adaptable to various industrial applications. They can be found in a wide range of industries, including manufacturing, mining, agriculture, construction, and material handling. These bearings are used in conveyor systems, power transmission equipment, pumps, fans, compressors, and many other rotating machinery applications.

  • Environmental Protection:
  • Pillow block bearings are designed to provide a degree of environmental protection to the bearing insert. The housing acts as a shield, preventing contaminants such as dust, dirt, and moisture from entering the bearing and causing premature failure. Additionally, the housing design often includes provisions for grease or oil lubrication, further protecting the bearing and ensuring proper lubrication for optimal performance.

  • Specialized Variations:
  • While the basic design of pillow block bearings remains the same, there are specialized variations available to meet specific application requirements. These include corrosion-resistant bearings for harsh environments, high-temperature bearings for elevated temperature applications, and sealed bearings for applications where additional protection against contamination is needed.

In summary, pillow block bearings are bearing units housed in a block or housing, widely used in various industrial applications. They provide support for rotating shafts, transmit loads, accommodate misalignments, and offer easy installation and maintenance. Their versatility, adaptability, and environmental protection make them suitable for diverse industrial sectors. With specialized variations available, pillow block bearings can be customized to meet specific application needs, ensuring reliable and efficient operation in a wide range of industrial machinery and equipment.

China Good quality CZPT CZPT CZPT All Series Bearings of Spherical / Needle Roller/Thrust/ Cylindrical/ Pillow Block Ball /Deep Groove Ball/ Auto/ Angular Contact Rolling Bearing   bearing bronzeChina Good quality CZPT CZPT CZPT All Series Bearings of Spherical / Needle Roller/Thrust/ Cylindrical/ Pillow Block Ball /Deep Groove Ball/ Auto/ Angular Contact Rolling Bearing   bearing bronze
editor by CX 2023-11-16

China best High Precision Stainless Steel Needle Roller Bearings deep groove ball bearing

Product Description

Product Description

 

Company Profile

In 2013, 1 associates decided to create an innovative sales service of bearings to satisfy diffierent kinds of application.

In order to supply even more stable quality to our vast customers, we established a factory in HangZhou city, ZHangZhoug province, China, near HangZhou and ZheJiang port, which has recognized by special ISO. The various bearings we produce there have been inspected and confirmed by SGS to be RoHS compliant.

In order to satisfy our customer’s diffierent industrial requirement: Advises, quick quotations, quick delievery, difficullt sourcing bearing products, the best suitable bearing(price, quality), We are working with over 300 suppliers to make sure to get the perfect part for you. We strive to offer the most precise and most suitable bearing for each part.

We Registered “GNYAR” in 2014, registered “MAJC” in 2018, both was received in high-performance praise, and earned high reputation among customers from motorcycle parts, auto parts and embroidery machine spare parts, Power tools, agricultural machine, bicycle, Semiconductor Facilities. Fitness Equipments, Toys, fishing, industrial using design.

After years of development, we believe that by establishing a mutually beneficial relationship with our customers we can both continue to grow and prosper, we wish and hope to always grant you satisfaction.
 

 

Product application

 

 

Packaging & Shipping

Certifications

 

FAQ

 

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are CZPT to customize housings in different styles, and sizes in different brands, we also customize circuit board & packaging box as per your requirements.
Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
Q:Do you offer free samples?
A: Yes we offer free samples to distributors and wholesalers

 

 

 

Contact Angle: Normal
Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

bushing

Bushing Application, Type and Compression Capability

Bushings are cylindrical bushings used in machinery. It prevents wear of moving parts and is often used as an enclosure. Bushings are also known as plain bearings or sleeve bearings. You may be wondering what these parts do and how they work, but this article aims to answer all your questions. We’ll cover bushing applications, types and compression capabilities so you can choose the right one for your needs.

application

A bushing is a mechanical component that plays an important role in many different fields. In addition to being very practical, it helps reduce noise, vibration, wear and provides anti-corrosion properties. These properties help mechanical equipment in various ways, including making it easier to maintain and reducing its overall structure. The functionality of an enclosure depends on its purpose and environment. This article will discuss some of the most common applications of casing.
For example, in an aircraft, the bushing assembly 16 may be used for the bulkhead isolator 40 . The bushing assembly 16 provides the interfaces and paths required for current flow. In this manner, the sleeve assembly provides a secure, reliable connection between two objects with different electrical charges. They also prevent sparking by increasing the electrical conductivity of the component and reducing its resistivity, thereby minimizing the chance of spark formation.
Another common application for bushings is as a support shaft. Unlike bearings, bushings operate by sliding between two moving surfaces. As a result, they reduce friction and handling stress, reducing overall maintenance costs. Typically, the bushing is made of brass or bronze. The benefits of bushings are similar to those of bearings. They help extend the life of rotating machines by reducing frictional energy loss and wear.
In addition to identifying growth opportunities and minimizing risks, the Bushing Anti-Vibration Mounts Market report provides insights into the dynamics of the industry and its key players. The report covers global market size, applications, growth prospects, challenges and regional forecasts. The detailed section on Bushing Anti-Vibration Mounts industry provides insights on demand and supply along with competitive analysis at regional and country level.

type

There are several types of bushings. Among them, the SF6 insulating sleeve has the simplest structure and is based on composite hollow insulators. It also has several metal shielding cylinders for regulating the electric field within the enclosure and another for grounding the metal shield. In addition to being lightweight, this sleeve is also very durable, but the diameter of its shield electrode is very large, which means special installation and handling procedures are required.
Linear bushings are usually pressed into the bore of the shaft and provide support as the shaft moves in/out. Non-press-fit bushings are held in place by snap rings or pins. For certain applications, engineers often choose bushings over bearings and vice versa. That’s why. Below are some common bushing types. If you need to buy, make sure you know how to tell them apart.
OIP bushings are used for oil-filled cable boxes, and oil-to-oil bushings are used for EHV power transformers. The main components of the OIP enclosure are shown in Figure 7a. If you are considering this type of bushing for your specific application, you need to make sure you understand your specific requirements. You can also consult your local engineering department for more information.
All types of bushings should be tested for IR and capacitance. The test tap should be securely attached to the bushing flange. If damaged bushings are found, replace them immediately. Be sure to keep complete records of the enclosure for routine maintenance and any IR testing. Also, be sure to pay attention to tan d and thermal vision measurements.
bushing

Compressive ability

There are several things to consider when choosing an enclosure. First, the material. There are two main types of bushings: those made of filled Teflon and those made of polyester resin. The former has the highest compressive strength, while the latter has a lower compressive capacity. If you need small amounts, glass-filled nylon bushings are the most common and best option. Glass-filled nylon is an economical material with a compressive strength of 36,000 lbs.
Second, the material used for the enclosure must be able to withstand the load. For example, bronze bushings can cause metal shavings to fall into the papermaking process. CG materials can withstand very high levels of moisture, which can damage bushings that require lubrication. Additionally, these materials can operate for extended periods of time without lubrication. This is particularly advantageous in the paper industry, since the casing operates in a humid environment.
In addition to the material and its composition, other characteristics of the enclosure must also be considered, including its operating temperature. Although frictional heat from moving loads and the temperature of the bushing itself can affect the performance of the bushing, these factors determine its service life. For high temperature applications, the PV of the enclosure should be kept low. On the other hand, plastic bushings are generally less heat resistant than metal bushings. In addition, plastic sleeves have a high rate of thermal expansion. To avoid this, size control is also important.
Low pressure bushings have different requirements. An 800 MVA installation requires a low voltage bushing rated at 14 000 A. The palm assembly of the transformer also features a large central copper cylinder for electrical current. The bushing must withstand this amount of current and must maintain an even distribution of current in the transformer tank. If there is a leak, the bushing must be able to resist the leak so as not to damage the transformer.

cost

The cost of new control arm bushings varies widely. Some parts are cheaper than others, and a new part is only $200. However, if you replace the four control bushings in your car, the cost can exceed $1,200. The cost breakdown for each section is listed below. If you plan to replace all four, the cost of each bushing may range from $200 to $500.
The control arm bushing bears the brunt of the forces generated by the tire and is parallel to the direction of the force. However, over time, these components wear out and need to be replaced. Replacing one control arm bushing costs between $300 and $1,200. However, the cost of replacing each arm bushing depends on your car model and driving habits. The control arm bushings should last about 100,000 miles before needing replacement.
The repair process for control arm bushings is time consuming and expensive. Also, they may need to remove the heat shield or bracket. In either case, the procedure is simple. Stabilizer bar brackets are usually attached with one or two mounting bolts. They can also be secured with nuts or threaded holes. All you need is a wrench to remove them.
The control arm bushings are made of two metal cylinders and a thick rubber bushing. These parts can deteriorate from potholes, off-roading or accidents. Because they are made of rubber, the parts are more expensive than new. Buying used ones can save you money because you don’t need to install them yourself. However, if you do plan on fixing a luxury car yourself, be sure to find one that has a warranty and warranty.
bushing

maintain

To prevent your vehicle from overheating and leaking oil, a properly functioning bushing must be used. If the oil level is too low, you will need to check the mounting bolts to make sure they are properly tightened. Check gasket to ensure proper compression is applied, replace bushing if necessary. You should notify your vehicle manufacturer if your vehicle is immersed in oil. Whenever an oil leak occurs, it is very important to replace the oil-filled bushing.
Another important aspect of bushing maintenance is the detection and correction of partial discharges. Partial discharge is caused by current entering the bushing. Partial discharge can cause tree-like structures, cracks and carbonization in the discharge channel, which can eventually damage the casing. Early detection of these processes is critical to ensuring that your vehicle’s bushings are properly maintained. Identifying and repairing partial discharges is critical to ensuring optimal operation, regardless of the type of pump or motor.
To diagnose casing condition, perform several tests. You can use tan d measurement, which is a powerful tool for detecting the ingress of water and moisture. You can also use power factor measurements to detect localized defects and aging effects. You can also check the oil level by performing an infrared check. After completing these tests, you will be able to determine if there is enough oil in the casing.
If the oil level in the transformer is too low, water and air may leak into the transformer. To avoid this problem, be sure to check the MOG and transformer oil levels. If the silicone is pink, replace it. You should also check the function of the oil pump, fan and control circuits annually. Check the physical condition of the pump and fan and whether they need to be replaced. Clean the transformer bushing with a soft cotton cloth and inspect for cracks.

China best High Precision Stainless Steel Needle Roller Bearings   deep groove ball bearingChina best High Precision Stainless Steel Needle Roller Bearings   deep groove ball bearing
editor by CX 2023-11-15

China Good quality Plastic Bearing Ball Bearing Deep Groove Ball Bearing bearing bronze

Product Description

The third workshop of our company mainly produces domestic high-quality bearings, series of stainless steel bearings, large stainless steel bearings, ceramic bearings, plastic bearings, high temperature bearings, slewing bearings, turntable bearings, agents of imported high-quality brand-name bearings, linear guides, oil seals, seals and other products, the products are mainly used in: Motor, electric tools, transport machinery, textile machinery, heavy machinery, metallurgical machinery, machine tools, medical equipment, automobile, machinery, water pumps, the company has a group of experienced senior professional and technical personnel, bearing, oil seal, the user can at any time to really solve various technical problems, to provide customers with first-class professional technical services. The designated brands are: domestic bearing series: Stainless steel deep groove ball bearings, stainless steel spherical outdide bearings, thrust ball bearing stainless steel, stainless steel, stainless steel joint bearings, self-aligning ball bearing stainless steel taper roller bearing, miniature bearing stainless steel, stainless steel, stainless steel flange bearing linear bearings, flange bearings, slewing ring bearings, wheel bearings, large bearings, ceramic bearings, high temperature bearings, plastic ball bearings, Plastic bearing seat, linear CZPT rail, ball screw, motor low noise special bearings and non-standard bearings, large stainless steel bearings, cross roller bearings, robot bearings and other products high temperature bearing series products: Welcome friends at home and abroad to cooperate with us in various forms. We will meet your needs with high quality products, prices and perfect service! Customer satisfaction is our CZPT pursuit of the goal!

 

 

 

 

Contact Angle: 45°
Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Plastic
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

bushing

What is the purpose of the bushing?

If you notice the truck making noises when cornering, the bushings may be worn. You may need to replace the ball joint or stabilizer bar, but a simple inspection will reveal that the noise is coming from the bushing. The noise from a worn bushing on a metal joint can mimic the sound of other problems in the suspension, such as a loose stabilizer bar or a failed ball joint.

Function

What is the purpose of the bushing? They play an important role in the operation of various mechanical parts. Their main functions include reducing the clearance between the shaft and the bearing and reducing the leakage of the valve. Bushings are used in different ways to ensure smooth operation and longevity. However, some new designers don’t appreciate the functionality of the case. So let’s discuss these features. Some of their most common applications are listed below.
First, the shell does a lot of things. They reduce noise, control vibration, and provide amazing protection for all kinds of industrial equipment. Large industrial equipment faces more wear, vibration and noise, which can render it completely inoperable. Bushings help prevent this by reducing noise and vibration. Bushing sets also extend equipment life and improve its performance. Therefore, you should not underestimate the importance of the casing in your device.
Another common function of bushings is to support components during assembly. In other words, the bushing reduces the risk of machine wear. In addition to this, they are superior to bearings, which are notoriously expensive to maintain. However, they are still useful, and their versatility cannot be overemphasized. If you’re considering installing one, you’ll be glad you did! These products have become a necessity in the modern industrial world. If you’re wondering how to choose one, here are some of the most common bushing uses.
Electrical bushings are an important part of many electrical equipment. They carry high voltage currents through the enclosure and provide an insulating barrier between live conductors and metal bodies at ground potential. They are made of a central conductive rod (usually copper or aluminum) and surrounding insulators made of composite resin silicone rubber. Additionally, the bushings are made of various materials. Whether copper, aluminum or plastic, they are an important part of many types of electrical equipment.

type

There are several different types of bushings on the market today. They may be cheap but they are of good quality. These products can be used in telephones, cable television, computer data lines and alarm systems. The key to buying these products online is finding the right appliance store and choosing a high-quality product. An online appliance store should have comprehensive information and ease of use. For the right electrical bushing, you should look for reliable online stores with the best prices and high quality products.
Capacitive grading bushings use conductive foils inserted into paper to stabilize the electric field and balance the internal energy of the bushing. The conductive foil acts as a capacitive element, connecting the high voltage conductor to ground. These types of bushings are sometimes referred to as capacitor grade bushings. Capacitive grading bushings are usually made of paper impregnated with epoxy resin or mineral oil.
When buying enclosures, you should know how they are used. Unlike ball bearings, bushings should be stored upright so that they are in the correct working position. This is because horizontal placement can cause air bubbles to form in the fill insulation. It is also important to store the bushing properly to prevent damage. The wrong way to store these components can result in costly repairs.
In addition to the physical structure, the bushing insulation must also be effective over the long term. It must resist partial discharge and working electric field stress. The material and design of the bushing can vary widely. Early on, porcelain-based materials were popular in bushing designs. Porcelain was chosen because of its low cost of production and very low linear expansion. Ceramic bushings, on the other hand, require a lot of metal fittings and flexible seals.
bushing

Durability

The RIG 3 Bushing Durability Test Standard simulates real-world service conditions for automotive bushings. This three-channel test standard varies casing loads and stresses by applying a range of different load conditions and various control factors. This test is critical to the durability of the case, as it accurately reproduces the dynamic loads that occur during normal use. This test is a key component of the automotive industry and is widely used in many industries.
The Advanced Casing Model has five modules to address asymmetry, nonlinearity, and hysteresis. This model also represents the CZPT lag model. The model can be parameterized in the time domain using MATLAB, and the results can be exported to other simulation software. The developed bushing model is a key component in the durability and performance of vehicle suspension components.
A conductive material is coated on the inner surface of the sleeve. The coating is chosen to conduct a certain amount of current. The conductive path extends from the blade spacer 126 to the sleeve projecting edge 204 and then through the housing 62 to the ground. The coating is made of a low friction material and acts as a wear surface against the bushing sidewall 212 and the housing 62 .
Another important factor in a bushing’s durability is its ability to friction. The higher the operating speed, the greater the load on the bushing. Since bushings are designed for lighter loads and slower speeds, they cannot handle large loads at high speeds. The P-max or V-max value of a bushing is its maximum load or speed at 0 rpm. The PV value must be lower than the manufacturer’s PV value.

price

If you need to replace the bushing on the control arm, you should understand the cost involved. This repair can be expensive, depending on the make and model of your car. Generally, you should pay between $105 and $180 for a replacement. However, you can choose to have it done by a mechanic at a lower cost. The labor cost for this job can be around $160, depending on your automaker.
The cost of replacing the control arm bushings can range from $200 on the low end to $500 on a luxury car. While parts are cheap, labor costs are the highest. Mechanics had to remove suspension and wheel assemblies to replace bushings. If you have some mechanical knowledge, you can replace the bushing yourself. Control arm bushings on the wheel side are usually about $20 each. Still, if you’re not a mechanic, you can save money by doing it yourself.
bushing

Install

Press-fit bushings are installed using a retaining ring with a diameter 0.3/0.4 mm larger than the inner diameter of the bushing. To ensure accurate installation, use a mechanically driven, pneumatic or hydraulic drill and insert the bushing into the appropriate hole. This process is best done using mounting holes with drilled holes for the clamps. Make sure the mounting hole is in the center of the bushing and free of debris.
Once the bushing is positioned, use a vise to install its nut. A cold bushing will compress and fit the shell better. Place the sleeve in the refrigerator for at least 24 hours to aid installation. After removing the bushing from the refrigerator, make sure it has enough diameter to fit into the enclosure. Next, place the opposite socket into the enclosure and use it as a stand. After a few minutes, the bushing should be fully seated in the housing.
Install the new bushing into the housing hole. If the previous one had a metal case, insert the new one through the taper. Always lubricate the inner and outer surfaces of the bushing. Then, apply pressure to the inner metal sleeve of the new bushing. You may notice that the new bushing does not exactly match the housing hole. However, that’s okay because the outer diameter of the bushing is larger than the outer diameter of the hub drive.
The installation of the bushing requires the use of the hydraulic unit 16 . Hydraulic unit 16 is located near the #1 journal of the camshaft and extends from #2 to #7. Hydraulic fluid forces piston 22 away from the outer end of cylinder 20 and pushes shaft 14 forward. The shaft is then moved forward, pushing the bushing 17 onto the piston. Multiple bushings can be installed in a single engine.

China Good quality Plastic Bearing Ball Bearing Deep Groove Ball Bearing   bearing bronzeChina Good quality Plastic Bearing Ball Bearing Deep Groove Ball Bearing   bearing bronze
editor by CX 2023-06-08